50 Way Cable Clamp for use with CHAMP Series Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Strain Relief for CHAMP IDC Connectors

Strain Relief and Cover Kits for CHAMP IDC connectors:
The System 5 Series 50 position Strain Relief Cover kits, 739-0931 and 739-0940 have a 120° cable exit Ø 8.9-17.3 mm Black and Almond in colour respectively.

The 14 position Strain Relief Cover kits, 823-6816 has a 90° cable exit Ø 4.7-5.84 mm and 823-6819 has a 180° cable exit Ø 6.73-7.87 mm.

The 24 position Strain Relief Cover kit, 823-6825 has a 90° cable exit Ø 6.35-7.62 mm.

The 50 position Strain Relief Cover kits:
719-4452 has 90° cable exit Ø 10.8-12.7 mm.
823-6828 has 90° cable exit Ø 12.07-13.7 mm.
823-6800 has a 180° cable exit Ø 9.65-10.92 mm.
823-6897 is a 0.8mm Champ Squeeze to Release Backshell, 180° cable exit Ø 8.0-8.76mm.

The 64 position Strain Relief Cover kits:
823-6812 has 90° cable exit Ø 13.7-15.36 mm.
823-6796 has 90° cable exit Ø 12.07-13.7 mm.

The 50 position Strain Relief and Covers only:
823-6787 Strain Relief, snap-on, two required.
823-6799 Cover, 90° cable exit, clamp required.
823-6831 Cover, with Captive 4-40 UNC screw, 90° cable exit Ø 8.89-10.8 mm.
823-6822 Cover, 90° cable exit, ratchet style clamp required.

Cable Clamps for Covers:
823-6783 Locking Latch style for cable Ø 10.8-12.7 mm.
823-6793 Locking Latch style for cable Ø 8.9-10.8 mm.

Champ connectors

Specificaties
Kenmerk Waarde
Accessory Type Cable Clamp
For Use With CHAMP Series Connector
Cable Type 10.8 mm Dia. Cable
Number of Ways 50
289 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
0,41
(excl. BTW)
0,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 0,41
50 - 99
€ 0,32
100 - 499
€ 0,30
500 - 999
€ 0,26
1000 +
€ 0,22
Related Products
A range of Accessories for IDC Ribbon Cable ...
Description:
A range of Accessories for IDC Ribbon Cable Connectors and Headers:693-5163 : single Locking lever long, for fitting to headers for use with IDC female connectors with Strain Relief.693-5176 : single Locking lever short, for fitting to headers for use ...
The strain relief adaptor and Boot are push ...
Description:
The strain relief adaptor and Boot are push fit on to the rear of the cable plug or socket. The adaptor includes a boot & cable clamp. • Stock No. 314-7067 is a 100 Series Stain Relief Adaptor• Stock No. ...
Professional range of Bulgin Mini Buccaneer accessories which ...
Description:
Professional range of Bulgin Mini Buccaneer accessories which include sealing caps, strain reliefs and cable glands. Cap includes strap and retains sealing integrityStrain relief is for cable plugs or sockets as an alternative to the gland nut and accommodates 5-7mm ...
A comprehensive range of Souriau UTG series connector ...
Description:
A comprehensive range of Souriau UTG series connector accessories, including receptacle dust cap and strain relief cable clamps. Power contacts for Trim Trio connectorsCombine power contacts with the standard size 16 signal contacts into the same housing.