01-2680, Single-Sided Stripboard FR-2 176.53 x 111.76 x 1.6mm FR1

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Veroboard Copper Stripboard

Veroboards brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It is manufactured from a copper clad laminate board. It features pierced copper tracks and a base material of SRBP. Stripboards also give you brilliant access to solder your components with relative ease.

Features and benefits:

• Create a simple printed circuit with the copper strips forming the interconnections
• This stripboard can be cut into a smaller board
• Single sided copper
• Tracks are bonded to SRBP board and pierced to accept terminal pins.

Why a stripboard and not a breadboard?

Stripboards and breadboards are slightly different. A breadboard is for early stage prototyping where soldering is not required where as a stripboard can be used for soldering. Breadboards make great use for testing components and basic circuitry. With stripboards you can solder components and make it more of a permanent circuit over a breadboard.

Stripboard cutter: 543-535

Specificaties
Kenmerk Waarde
Base Material Synthetic Resin Bonded Paper
Number of Sides 1
Dimensions 176.53 x 111.76 x 1.6mm
Hole Diameter 1mm
Hole Pitch 2.54 x 2.54mm
FR Material Grade FR1
Length 176.53mm
Thickness 1.6mm
Width 111.76mm
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
97 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,85
(excl. BTW)
15,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 12,85
5 - 9
€ 11,42
10 - 39
€ 9,97
40 +
€ 8,22
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Ideal for development and prototype work, Veroboard is ...
Description:
Ideal for development and prototype work, Veroboard is intended primarily for wiring discreet components, particularly in analogue circuits.It is also useful when there is a large number of buses or common signals.The basic principle of Veroboard entails arranging components so ...