Single-Sided Stripboard Epoxy Glass 454.66 x 95.1 x 1.6mm FR4

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Single-sided Veroboard® boards

Ideal for development and prototype work, Veroboard is intended primarily for wiring discreet components, particularly in analogue circuits.It is also useful when there is a large number of buses or common signals.
The basic principle of Veroboard entails arranging components so that they are electrically connected by predetermined copper tracks. The tracks may be cut to suit, usinga cutter (stock number 543-535) or by drilling holes.
A complete range of plugs is available for use with Veroboard.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Dimensions 454.66 x 95.1 x 1.6mm
Copper Thickness 35µm
Hole Diameter 1.02mm
Hole Layout 34 x 179
Hole Pitch 2.54 x 2.54mm
FR Material Grade FR4
Length 454.66mm
Thickness 1.6mm
Width 95.1mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
66,02
(excl. BTW)
79,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 66,02
5 - 9
€ 62,71
10 - 39
€ 59,42
40 +
€ 56,11
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Complies with military standard P 13949F M12 13949F. ...
Description:
Complies with military standard P 13949F M12 13949F. Professional quality boards with blue coloured positive resinFire resistance: UL 94-V0Board material Glass-Epoxy FR4.
HF Verocard for circuits with a critical assembly.Component ...
Description:
HF Verocard for circuits with a critical assembly.Component side fully laminated with etched holes. Maximum isolation through grounding of the lamination. For reliable HF, digital and analogue circuits34 parallel circuit tracks, each with 540 holesNumerical gridDIN 41612 connector receptacle.
SRBP-paper FR2 1.5mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, ...
Description:
SRBP-paper FR2 1.5mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, hot air levelled (HAL-leadfree)Board size 100 x 160 x 1.6mmHole layout 37 x 57Hole dia 1.0mmPitch 2.54mm (0.1in)Copper thickness 35μm.