Surface Mount (SMT) Board Multi-Adaptor Epoxy Glass Double-Sided 160 x 100 x 0.7mm FR4

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: AT
Productomschrijving

SMD Standard Matrix Prototyping Card

Double-sided FR4 epoxy board
Copper thickness 35μm
Plated through holes
Tin coated
Hole pitch 1.27mm (523-0672 has 1.27mm and 2.54mm pitch areas)

Note

This card has 1.27mm as well as 2.54mm hole pitch areas

Specificaties
Kenmerk Waarde
SMD Component Type Multiple Types
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 160 x 100 x 0.7mm
Copper Thickness 35µm
Hole Diameter 0.35 mm, 1 mm
Hole Pitch 1.27 x 1.27 mm, 2.54 x 2.54 mm
FR Material Grade FR4
Length 160mm
Thickness 0.7mm
Width 100mm
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
44,36
(excl. BTW)
53,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 44,36
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
SRBP-paper FR2 1.5mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, ...
Description:
SRBP-paper FR2 1.5mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, hot air levelled (HAL-leadfree)Board size 100 x 160 x 1.6mmHole layout 37 x 57Hole dia 1.0mmPitch 2.54mm (0.1in)Copper thickness 35μm.