Phoenix Contact 30 V dc 10 (Discharge)kA TTC-6P-2X1-M-24DC-PT-I Surge Protection Device, DIN Rail Mounting

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact TTC Series

A professional range of Phoenix Surge Protection Devices. These surge protection devices come with integrated status indicator and knife disconnection for either a 2 or 3 wire floating signal circuit. All products are highly reliable and of excellent quality.

Features and Benefits

- 6 mm overall width
- Push-in connection technology
- Integrated status indicator without auxiliary energy and option of remote signaling
- Integrated knife disconnection for easier maintenance work

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type Surge Protection Device
Maximum Voltage Rating 30 V dc
Mounting Type DIN Rail
Maximum Surge Current 10 (Discharge)kA
Series TTC-6P-2X1-M-24DC-PT-I
Length 100mm
Depth 6.2mm
Height 105.8mm
Dimensions 100 x 6.2 x 105.8mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
146,78
(excl. BTW)
177,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 146,78
10 - 24
€ 132,10
25 - 49
€ 118,89
50 - 99
€ 107,00
100 +
€ 96,30
Related Products
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains ...
These high-energy surge and lighting arrestors have a ...
Description:
These high-energy surge and lighting arrestors have a wide band-width, low VSWR and low insertion loss. Applications include Telemetry, Fixed/Mobile Communication Systems including both transmitters and receivers. The devices have an M5 stud on the base so that they can ...
STP T12 25 is the series of combined ...
Description:
STP T12 25 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
STP T12 12.5 is the series of combined ...
Description:
STP T12 12.5 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...