Phoenix Contact 21 V ac, 30 V dc 10kA PT-IQ-1X2+F-24DC-UT Protective Plug, DIN Rail Mounting

Wetgeving en compliance
Niet conform
Land van herkomst: DE

PLUGTRAB PT- IQ Surge Protection System

PLUGTRAB PT-IQ intelligent and systematic surge protection system for measurement and control (MCR) technology. It is the first solution to offer direct early detection of damaged surge protective devices using a three-stage status display to indicate the state of the protective device/s. (Green - OK; Yellow - Performance limit reached and replacement recommended; Red - Overloaded and replacement required)

The design of the rugged PLUGTRAB PT-IQ surge protection module system is such that
it is not possible to incorrectly connect each module, it is easily extended with each controller monitoring and supplying up to 28 protective devices and each module locks securely in place it makes this system particularly suited to provide reliable protection in tough conditions.

Key features of the system are:-

Unique three stage indication system flags damaged as well as failed plugs
Energy efficient as the Green indicator can be turned off by the control unit
Suited for use in demanding environments
Incorrect connection is not possible due to voltage keying and protection against polarity reversal, ensuring error free installation
Space saving design as one device protects up to five signal lines
Conventional wiring is not required as power supply and status information is communicated by converting the individual DIN rail connections into a bus
Contact with DIN Rail is such that it is resistant to surge currents
DIN rail system controller can accommodate the monitoring and supply of up to 28 protective devices
Direct or indirect grounding connection options available to cover a wide range of applications

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Kenmerk Waarde
Suppressor Type Protective Plug
Maximum Voltage Rating 21 V ac, 30 V dc
Mounting Type DIN Rail
Maximum Surge Current 10kA
Series PT-IQ-1X2+F-24DC-UT
Length 17.7mm
Depth 77.5mm
Height 91.1mm
Dimensions 17.7 x 77.5 x 91.1mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 172,88
10 - 24
€ 159,05
25 - 49
€ 154,04
50 - 99
€ 146,43
100 +
€ 139,00
Related Products
STP T12 12.5 is the series of combined ...
STP T12 12.5 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
MA15 series surge protection devices protect electronic equipment ...
MA15 series surge protection devices protect electronic equipment and computer networks against ""noise pollution"".MA15 units clean the effects of industrial noise and surges that may be caused by lightning, switching devices and power factor correction circuits. Suitable for AC or ...
Valvetrab Surge protection for Photovoltaic equipment provides an ...
Valvetrab Surge protection for Photovoltaic equipment provides an effective method of limiting high-energy transients such as lightning strikes. These are a type 2 protective measure for green renewable energy PV systems which significantly increases their availability and operability. The Valvetrab ...
Type 1 and 2 prewired spark gap based ...
Type 1 and 2 prewired spark gap based combined lightning current and surge arresters consisting of a base and plug in modules. Maximum system availability and reliability due to the RADAX Flow follow current limitationNo tripping of 20amp gL/gG fuses ...