Phoenix Contact 240 V ac NEF 1- 3 EMC Filter, DIN Rail Mounting

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Phoenix Contact SFP TRAB EMC Filters

The Phoenix Contact SFP-TRAB series of EMC Filters have a combined protective circuit for absorbing transient surge voltages and high frequency interference voltages. This highly reliable series also features thermal monitoring of the protective circuit and disconnection status signal.

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type EMC Filter
Maximum Voltage Rating 240 V ac
Mounting Type DIN Rail
Series NEF 1- 3
Length 25mm
Depth 84.2mm
Height 79.4mm
Dimensions 25 x 84.2 x 79.4mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +100°C
19 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
98,42
(excl. BTW)
119,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 98,42
10 - 24
€ 90,55
25 - 49
€ 87,69
50 - 99
€ 83,36
100 +
€ 79,13
Related Products
Delta connected flexible wire ended universal DIN rail ...
Description:
Delta connected flexible wire ended universal DIN rail mounting RC contact arc suppressors designed to be connected across switching contacts of Control/Switchgear ContactorsIdeal for applications where inductive loads are switched and contact arc reduction is required to prolong contact life. ...
Ultra-slim devices for protecting electronic equipment against surges ...
Description:
Ultra-slim devices for protecting electronic equipment against surges on control loop cabling. Full hybrid surge protection to BS6651 (category C)Ultra-slim 7mm module, DIN-rail mounting and earthingProtection for 4-20mA loopsAuto-reset.
Valvetrab Surge protection for Photovoltaic equipment provides an ...
Description:
Valvetrab Surge protection for Photovoltaic equipment provides an effective method of limiting high-energy transients such as lightning strikes. These are a type 2 protective measure for green renewable energy PV systems which significantly increases their availability and operability. The Valvetrab ...
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...