TRACOPOWER Switching Regulator, Through Hole, 5V dc Output Voltage, 6.5 → 36V dc Input Voltage, 1A Output
- RS-stocknr.:
- 166-6057
- Fabrikantnummer:
- TSR 1-2450SM
- Fabrikant:
- TRACOPOWER
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 tube 10
€ 89,44
(excl. BTW)
€ 108,22
(incl. BTW)
| Tube(s) | Per tube | Per stuk* |
| 1 - 4 | € 89,44 | € 8,944 |
| 5 - 9 | € 86,76 | € 8,676 |
| 10 - 24 | € 84,07 | € 8,407 |
| 25 - 49 | € 80,50 | € 8,05 |
| 50 + | € 76,92 | € 7,692 |
| *prijsindicatie | ||
- RS-stocknr.:
- 166-6057
- Fabrikantnummer:
- TSR 1-2450SM
- Fabrikant:
- TRACOPOWER
Datasheets
Wetgeving en compliance
- Land van herkomst:
- TW
Productomschrijving
Traco Power Switching Regulator, SMD-10 Format, 94% Efficiency - TSR-1SM Series - TSR 1-2450SM
Are your power supply and components struggling to work together? Bring them closer with this Traco Power switching regulator. It takes a wide input range from 6.5 to 36V DC and delivers a single steady output of 5V DC. As its 0.6% load regulation rating shows, the unit reliably sends a steady output even through supply fluctuations. Secure solder mounting holds the converter in place against disruptive movement. An efficiency rating of 94% indicates this is a smart pick for energy-saving conversion.
Features & Benefits
• Starts up in 5ms to deliver a rapid response
• Includes short-circuit protection to minimise the risk of damage from electrical faults
• Emits ripple voltage of just 50mV to cut down on disruptive power line noise
• Slim SMD-10 package easily slips into busy systems
• Insulating plastic casing prevents exposure to hazardous loads
• Includes short-circuit protection to minimise the risk of damage from electrical faults
• Emits ripple voltage of just 50mV to cut down on disruptive power line noise
• Slim SMD-10 package easily slips into busy systems
• Insulating plastic casing prevents exposure to hazardous loads
Applications
• Portable electronics
• Power utilities
• Industrial automation
• Power utilities
• Industrial automation
How do I reset this device after its short-circuit protection trips?
This unit automatically restarts its circuit once you fix the fault, so there's no need to worry about manual resets or long downtimes.
Specificaties
Kenmerk | Waarde |
|---|---|
| Output Voltage | 5V dc |
| Output Current | 1A |
| Input Voltage | 6.5 → 36V dc |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Package | TO-220 |
| Efficiency | 84% @ Vin max, 94% @ Vin min |
| Ripple And Noise | 50 (1.2 to 6.5 VDC Models) mV, 75 (9 to 15 VDC Models) mV |
| Maximum Temperature | +85°C |
| Minimum Temperature | -40°C |
| Line Regulation | 0.2% |
| Load Regulation | 0.6% |
| MTBF | >5350000h |
| Length | 11.7mm |
| Depth | 7.6mm |
| Width | 10.2mm |
| Weight | 1.9g |