Murata Power Solutions Switching Regulator, 5V dc Output, 1.5A

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications

• UL certified

Specificaties
Kenmerk Waarde
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package SIP
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 90.5%
Load Regulation ±0.25%
Line Regulation ±0.25%
Ripple And Noise 75mV Pk-Pk
Depth 16.5mm
Weight 2g
Series OKI-78SR
Length 10.4mm
Width 7.6mm
181 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
983 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,27
(excl. BTW)
5,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 4,27
5 - 9
€ 4,06
10 - 24
€ 3,84
25 - 49
€ 3,63
50 +
€ 3,41
Verpakkingsopties
Related Products
The TRACOPOWER non-isolated DC/DC converter (POL) which belongs ...
Description:
The TRACOPOWER non-isolated DC/DC converter (POL) which belongs to series TSR 1E is a 1 Ampere step-down switching regulator and a drop-in replacement for inefficient 78xx linear regulators. This series comes in a standard plastic SIP-3 case and complements our ...
The Recom R-78Bxx series are highly efficient, non-isolated ...
Description:
The Recom R-78Bxx series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. Their low-profile design enables them to be used in numerous applications from distribution supply systems, controllers and sensors, ...
A range of PCB-mounting Step-down (Buck) switching voltage ...
Description:
A range of PCB-mounting Step-down (Buck) switching voltage regulator modules from Texas Instruments. These products offer highly efficient space-saving solutions for low-power step-down DC-DC applications where isolation is not required. Integrated shielded inductorPrecision enable, soft-start, and tracking for ...
The Recom R-78E series are highly efficient, non-isolated ...
Description:
The Recom R-78E series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. Coupled with the compact design, this module is ideal across a number of industrial applications.With a high start-up ...