Recom Switching Regulator, 8.5 → 28V dc Input, 5 → 7.5V dc Output, 5.5A

  • RS-stocknr. 828-9276
  • Fabrikantnummer R-746.5P
  • Fabrikant Recom
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

R-7xxxP Series

Non-isolated
Positive step down integrated switching regulator
Wide input voltage range
Adjustable output voltage via external resistors
Remote On/Off Control
Over load and continuous short circuit protection
Vertical mount, SIP-12 package

Note

Operating temperature quoted without derating output.
Adjustable output voltage range shown in brackets.

Specificaties
Kenmerk Waarde
Input Voltage 8.5 → 28V dc
Output Voltage 5 → 7.5V dc
Number of Outputs 1
Output Current 5.5A
Power Rating 1.4W
Mounting Type Through Hole
Package SIP
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 93%
MTBF 749 x 10³ (+25 °C)h
Load Regulation 1%
Line Regulation 1%
Ripple And Noise 70mV Pk-Pk
Length 32.2mm
Depth 15mm
Width 9.1mm
Weight 9g
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
24,46
(excl. BTW)
29,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,46
5 - 9
€ 24,26
10 - 24
€ 24,08
25 - 49
€ 23,71
50 +
€ 22,58
Verpakkingsopties
Related Products
Non isolatedMedical safety approval EN-60601-1-2High efficiency switching regulatorNo ...
Description:
Non isolatedMedical safety approval EN-60601-1-2High efficiency switching regulatorNo need for heatsinksWide input voltage rangeLow ripple and noiseShort circuit protection and thermal shutdownPin-out compatible with LM78xx linear regulatorsIndustry standard SIP-3 package.
The TR series from XP Power offers a ...
Description:
The TR series from XP Power offers a highly reliable range of 0.5 Amp, 3 pin SIP 3T switching regulators. The series has been designed in an industry standard package, features continuous short-circuit protection and a high efficiency of up ...
R1Z series 1W single output, SMD, regulated DC-DC ...
Description:
R1Z series 1W single output, SMD, regulated DC-DC converters designed for isolating or converting DC power rails where an SMD format with regulated output is required. Miniature designRegulatedUL94V-0 package materialHigh temperature operationToroidal MagneticsNo load power consumption: 217mW typically.
The STS10 is a new series of innovative ...
Description:
The STS10 is a new series of innovative low cost DC-DC buck regulators. Based on SMD technology and high levels of automation the series offers many features including voltage trimming, remote on/off, continuous short circuit protection, regulation and high efficiency. ...