Flat Button Tactile Switch, SPST 50 mA 0.7mm PCB
- RS-stocknr.:
- 125-3459
- Fabrikantnummer:
- JB15FH
- Fabrikant:
- NKK Switches
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 125-3459
- Fabrikantnummer:
- JB15FH
- Fabrikant:
- NKK Switches
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
NKK Low Profile Process Sealed Tactiles JB Series
The JB Series tactiles are designed with a special bracket for right angle mounting.Rubber seal construction preventing contact contamination allowing automated soldering and cleaning.
Features and Benefits
Higher operating force type
Design flexibility
Dome contact
Slanted terminals
Molded in terminals
Terminal spacing conforms to 2.54mm PCB grid
High reliability
Long life up to 5,000,000 operations
Design flexibility
Dome contact
Slanted terminals
Molded in terminals
Terminal spacing conforms to 2.54mm PCB grid
High reliability
Long life up to 5,000,000 operations
Standards
UL94V-0
Tactile
Specificaties
Kenmerk | Waarde |
|---|---|
| Contact Configuration | SPST |
| Terminal Type | PC Pin |
| Switch Operation | Off-On (Momentary) |
| Actuator Length | 0.7mm |
| Actuator Type | Flat Button |
| Length | 10.8mm |
| Width | 10.8mm |
| Dimensions | 10.8 x 10.8mm |
| Mounting Type | PCB |
| Contact Current Rating | 50 mA |
| Voltage Rating | 24V dc |
| Operating Force | 1.76 N |
| Maximum Operating Temperature | +70°C |
| Minimum Operating Temperature | -25°C |
| Contact Material | Brass (Stationary), Stainless Steel (Movable) |
| Operating Temperature Range | -25 → +70°C |