Megger TDR1000/3 TDR Cable Fault Locator, 5000m

  • RS-stocknr. 764-2825
  • Fabrikantnummer 1001-788
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Megger TDR 1000/3 Cable Fault Locator

The Megger TDR 500/3 cable fault locator has a minimum resolution of 0.1m/0.3ft and a 5km/15kft maximum range depending on the velocity factor selected and cable type. An auto selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace. It is a handheld, compact time domain reflectometer for locating faults on metallic cables.
Supplied with:
5 x AA batteries, hard carry case, miniature clip test lead set and user guide CD

Features and Benefits

Dual cursors providing an instant indication of the distance between two points
Auto set up for instant use
Auto selected output impedance (between 25ohm, 50ohm, 75ohm and 100ohm)
Ultra-fast pulse for near end fault identification
Trace HOLD feature to allow comparison between cables
Designed for use on all metallic cable pairs
Backlit graphics monochrome LCD (256 x 128)
Adjustable display contrast
Resolution to 0.1m
For use on telecom TNV-3 circuits
Power blocking filter not required
Auto selected output impedance (between 25ohm, 50ohm, 75ohm and 100ohm)
2ns pulse for near end fault location
Auto option selecting gain and pulse for each range
Display distance in metres or feet
Uses five AA (LR6) primary cells
Operating temperature ranges between 15°C and 50°C

Applications

Residential sites
Industries

Certifications

IP54 rated
IEC61010-1
BSEN 61326-1
150V CAT IV safety rated

Specificaties
Kenmerk Waarde
Maximum Range 5000m
Resolution 1 %
Cable Type Metallic Cable Pair
Maximum Pulse Width 2ns
Minimum Pulse Width 4000ns
Pulse Amplitude 5V Pk-Pk
Output Impedance 25 Ω, 50 Ω, 75 Ω, 100 Ω
Velocity Factor/Propagation Velocity 0.99
Battery Life 14 h
Battery Type AA
Display Type LCD
Power Source Battery
Dimensions 115 x 48 x 230mm
Length 115mm
Width 48mm
Maximum Operating Temperature +50°C
Weight 600g
Model Number p TDR1000/3
Height 230mm
Minimum Operating Temperature -15°C
9 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
1.200,00
(excl. BTW)
1.452,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.200,00
Related Products
The Beha Amprode UAT-610 Underground utilities locator, finds ...
Description:
The Beha Amprode UAT-610 Underground utilities locator, finds cable and wire ground faults, sheath faults or pipeline coating defects, where the utility is in direct contact with the ground. The intuitive transmitter automatically chooses the correct locating function based on ...
The Fluke Networks Fiber QuickMap kit with SimpliFiber ...
Description:
The Fluke Networks Fiber QuickMap kit with SimpliFiber Pro-optical test equipment has a measurement range of up to 1m. This device helps in getting rid of the hassle associated with inspecting fibre end faces, especially in low light and high ...
The TDR500/3 is a hand held, compact Time ...
Description:
The TDR500/3 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.Four ...
Terminal adaptor kit for TDR2000/3 Cable Fault Locator. ...
Description:
Terminal adaptor kit for TDR2000/3 Cable Fault Locator.