2.5:1 Surface Mount Flyback Transformer, 14μH, 0.04Ω

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Wurth Flyback Transformers

Designed specifically for DC-DC convertors and offline PWM switching regulators
The transformer is much smaller than a normal mains transformer for the same power rating due to the high operating frequency

Specificaties
Kenmerk Waarde
Primary Inductance 14µH
Primary DC Resistance 0.04Ω
Secondary DC Resistance 0.01Ω
Turns Ratio 2.5:1
Mounting Type Surface Mount
Leakage Inductance 500nH
Dimensions 29.08 x 23.11 x 11.43mm
Depth 11.43mm
Length 29.08mm
Width 23.11mm
Minimum Temperature -40°C
Primary Voltage Rating 30 → 75V
Maximum Temperature +125°C
Power Rating 30W
Isolation Voltage 2.5kV
Secondary Voltage Rating 10 V, 12 V
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-09-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 125)
7,84
(excl. BTW)
9,49
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
125 +
€ 7,84
€ 980,00
*prijsindicatie
Related Products
LAN Ethernet Transformers are IEEE 802.3 compatible, single-port, ...
Description:
LAN Ethernet Transformers are IEEE 802.3 compatible, single-port, and potted construction LAN 10/100 Base-T impedance matching / isolation transformer module. LAN transformers include common mode chokes for noise attenuation for Ethernet applications and offer 1.5 kVrms isolation voltage and an ...
MID-PPTI Push-Pull Transformers for Texas Instruments. Small sizeSurface ...
Description:
MID-PPTI Push-Pull Transformers for Texas Instruments. Small sizeSurface mountLow profileOperating temp: -40°C to 125°CFunctional, supplementary or reinforced insulationApplicationsIsolated interface power supply for CAN, RS-485, RS-422, RS-232, SPI, I2C, lower-power LANIndustrial automationProcess controlMedical ...
MID-IBMAX Isolated Buck Transformers for Maxim Integrated Iso-Buck ...
Description:
MID-IBMAX Isolated Buck Transformers for Maxim Integrated Iso-Buck Chipsets. No optocoupler used for feedbackPrimary side regulationReduces number of componentsApplicationsFactory automationProgrammable Logic Controllers (PLCs)Isolated Communications Interface like RS485, RS232.
Isolation converter transformer with isolation voltage of 1.5 ...
Description:
Isolation converter transformer with isolation voltage of 1.5 kVrms (C/MC types) and 4 kVrms (VC/VMC types)Specifically designed to provide isolated RS-485 and RS-232 interface, for use with Maxim integrated circuit MAX253 (stock no. 622-8210)Industry standard pinout, low profile, through hole ...