1:1:1 Through Hole Telecom Transformer, 2.5mH

  • RS-stocknr. 218-9852
  • Fabrikantnummer IT243
  • Fabrikant Schaffner
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Pulse transformers IT Series

Schaffner's IT pulse transformers are designed to offer you galvanic isolation for transformer coupled gate drives. The IT series provides negligible delays and the possibility of voltage scaling. They are available with single or double secondary winding for multiple gate drives. Choosing the IT product line brings you the rapid availability of a standard gate drive transformer. A wide selection on turns ratio, ignition current and voltages are designed to offer you the desired standard product.

Galvanic separation
Voltage resistance up to 8 kV
Allows high potential difference voltage scaling
Optional grounded shields
Vacuum potting
Very low partial discharge effects
PCB through hole mounting or faston types

Specificaties
Kenmerk Waarde
Primary Inductance 2.5mH
Turns Ratio 1:1:1
Mounting Type Through Hole
Dimensions 16.7 x 17.6 x 11.3mm
Depth 11.3mm
Length 16.7mm
Width 17.6mm
Primary Voltage Rating 500V
Maximum Temperature +70°C
Minimum Temperature -25°C
31 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
109 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,23
(excl. BTW)
6,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 5,23
50 - 99
€ 3,56
100 - 199
€ 3,34
200 - 499
€ 3,17
500 +
€ 3,01
Related Products
A187A10C audio input transformers from OEP have multiple ...
Description:
A187A10C audio input transformers from OEP have multiple electrostatic and magnetic shields and provide galvanic isolation. The A187A10C transformer is a high ratio step down transformer featuring Faraday shielding that reduces hum and stray magnetic interference. +21.5dbu maximum input level ...
LAN Ethernet Transformers are IEEE 802.3 compatible, single-port, ...
Description:
LAN Ethernet Transformers are IEEE 802.3 compatible, single-port, and potted construction LAN 10/100 Base-T impedance matching / isolation transformer module. LAN transformers include common mode chokes for noise attenuation for Ethernet applications and offer 1.5 kVrms isolation voltage and an ...
PCB mounting mains transformers with a single 230Va.c. ...
Description:
PCB mounting mains transformers with a single 230Va.c. or twin 115Va.c. 50/60Hz primary winding. Independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options. Fully shrouded bobbins Extra pins ...
Two channel with chokeSupports serial daisy chain / ...
Description:
Two channel with chokeSupports serial daisy chain / IsoSPIHolds reference designs with Analog Device’s Model LTC6804-1/6811 and NXP’s MC33771/33772Operating temperature: -40 to +125 °C1600 Vdc working voltage Hi-Pot:4300 Vdc.