Sensirion SHT25, Temperature & Humidity Sensor -40 → +125 °C ±1.8%RH Serial-I2C, 6-Pin DFN

  • RS-stocknr. 146-2585
  • Fabrikantnummer SHT25
  • Fabrikant Sensirion
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

SHT2x Digital Humidity & Temperature Sensors

The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy

CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V

The following sensors are available:

123-7351 · SHT20 · I²C Digital output
786-5554 · SHT21 · I²C Digital output
876-5055 · SHT21P · PWM output
876-5064 · SHT21S · PDM output
727-6226 · SHT25 · I²C Digital output

Temperature & Humidity Sensors, Sensirion

Specificaties
Kenmerk Waarde
Sensor Function Temperature & Humidity
Output Type Digital
Interface Type Serial-I2C
Accuracy ±1.8%RH
Mounting Type Surface Mount
Pin Count 6
Operating Temperature Range -40 → +125 °C
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.1 V
Maximum Operating Supply Voltage 3.6 V
Package Type DFN
Length 3mm
Height 1.1mm
Width 3mm
Dimensions 3 x 3 x 1.1mm
Resolution 12 bit
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 400)
6,08
(excl. BTW)
7,36
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
400 +
€ 6,08
€ 2.432,00
*prijsindicatie
Related Products
High-accuracy digital temperature sensors from Sensirion featuring increased ...
Description:
High-accuracy digital temperature sensors from Sensirion featuring increased intelligence, reliability and improved accuracy specifications in comparison to their predecessors. Functionality includes enhanced signal processing, two user selectable I2C addresses and communication speeds of up to 1 MHz.123-7354 · ...
The MAX31865 is an easy-to-use resistance-to-digital converter optimized ...
Description:
The MAX31865 is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). An external resistor sets the sensitivity for the RTD being used and a precision delta-sigma ADC converts the ratio of the RTD resistance to the reference ...
TE Connectivity’s MEAS Ni1000SOT series of resistance temperature ...
Description:
TE Connectivity’s MEAS Ni1000SOT series of resistance temperature detectors (RTD) are miniature, low cost and high precision. Constructed from a silicon substrate with a PVD deposit, the structure is covered by a passivation layer whilst the nickel elements are mounted ...
Integration Lowers System Cost, Simplifies Design Efforts, and ...
Description:
Integration Lowers System Cost, Simplifies Design Efforts, and Reduces Design Cycle TimeSimple Conversion of Platinum RTD Resistance to Digital ValueHandles 100Ω to 1kΩ (at 0°C) Platinum RTDs (PT100 to PT1000)Compatible with 2-, 3-, and 4-Wire Sensor ConnectionsSPI-Compatible Interface20-Pin TQFN and ...