Microchip MCP9700AT-E/TT, Voltage Temperature Sensor -40 → +125 °C ±2°C Analogue, 3-Pin SOT-23

  • RS-stocknr. 738-7048P
  • Fabrikantnummer MCP9700AT-E/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

MCP9700/9701 Thermistor ICs

The MCP9700/9701 series of thermistor ICs convert temperature to analogue voltage. A key advantage of this series of thermistor IC is it's resistance to parasitic capacitance and the ability to drive large capacitive loads.
Applications include temperature monitoring, office equipment, home appliances, entertainment systems, hard disk drives, battery packs and any application that needs to measure a relative change in temperature.

Temperature & Humidity Sensors, Microchip

Specificaties
Kenmerk Waarde
Sensor Function Temperature
Output Type Voltage
Interface Type Analogue
Accuracy ±2°C
Mounting Type Surface Mount
Pin Count 3
Operating Temperature Range -40 → +125 °C
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.3 V
Maximum Operating Supply Voltage 5.5 V
Package Type SOT-23
Length 3.05mm
Height 1.02mm
Width 1.4mm
Sensor Gain 10mV/°C
Resolution 8 bit
Dimensions 3.05 x 1.4 x 1.02mm
6220 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (Supplied on a Reel) Quantities below 150 on continuous strip
0,271
(excl. BTW)
0,328
(incl. BTW)
Aantal stuks
Per stuk
30 +
€ 0,271
Verpakkingsopties
Related Products
VEML6040 color sensor senses red, green, blue, and ...
Description:
VEML6040 color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits into a single chip using CMOS process. With the color sensor applied, the brightness, and color temperature of backlight can be ...
The GF708 magnetic field sensors from Sensitec are ...
Description:
The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity. The GF708 sensor can be used for highly sensitive applications with ...
The HDC100x devices are digital humidity sensors with ...
Description:
The HDC100x devices are digital humidity sensors with an integrated temperature sensor. The sensing element is placed on the bottom side of the device, making the chip more robust against dirt, dust, and other environmental contaminants. Relative Humidity (RH) Range: ...
The MAX31865 is an easy-to-use resistance-to-digital converter optimized ...
Description:
The MAX31865 is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). An external resistor sets the sensitivity for the RTD being used and a precision delta-sigma ADC converts the ratio of the RTD resistance to the reference ...