KLBUE, Clamping Yoke for use with Terminal Blocks

  • RS-stocknr. 268-2109
  • Fabrikantnummer KLBUE 4-13.5 -1592810000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: RO
Productomschrijving

Shielded Terminal Cable

Terminal cable clamps enabling easy termination and connection of cable shielding to terminal blocks. The cable clamps accept shielded cable diameters between 3 and 13.5mm and are manually mounted on a 10 x 3mm busbar attached to a busbar support (not currently supplied by RS) which is mounted on the DIN rail.

Note

10 x 3mm busbar is not included

Specificaties
Kenmerk Waarde
Accessory Type Clamping Yoke
For Use With Terminal Block
Series KLBUE
95 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
35 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
6,458
(excl. BTW)
7,814
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 6,458
€ 32,29
*prijsindicatie
Related Products
Female plug 180° terminal blocks feature a clamping-yoke ...
Description:
Female plug 180° terminal blocks feature a clamping-yoke screw system that enables you to connect wires with a straight outlet direction in a 3.5 mm pitch. The clamping yoke steel is hardened and zinc-chromed plated. The terminals are two-part and ...
This HF plug connector is the most commonly ...
Description:
This HF plug connector is the most commonly used coaxial connection. It features a compact design and a bayonet cap, and is user-friendly and moisture-proof. Spring-mounted CuBe2 contact parts, gold-plated internal conductors and PTFE insulated parts with CuZn39Pb3 nickel-plated housing ...
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design. • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...
High quality PCB mount screw terminals available in ...
Description:
High quality PCB mount screw terminals available in vertical, 55° entry or double level mouldings. Standard, low profile and high current versions are all available on either 2 way or 3 way housings, side stackable up to 30 way. All ...