CEP, End Plate for use with CDU, CTR

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Spring Loaded Screw Clamp Terminal Blocks

DIN Rail mounted spring loaded screw terminal blocks have a spring under the cable clamp that provides a secure contact even if the terminal is not correctly tightened.

• Suitable for a broad range of cross-section and wire types
• Wires can be connected without any special preparations
• Easy to handle and safe to connect
• Excellent vibration resistance
• High reliability and maintenance free
• Very low contact resistant
• Easy mounting and dismounting from DIN rail

Note

For a suitable end plate, please see RS 878-7540

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Accessory Type End Plate
For Use With CDU, CTR
Series CEP
430 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1395 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,31
(excl. BTW)
0,38
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 0,31
€ 1,55
*prijsindicatie
Related Products
Cover for the last terminal in a blockFor ...
Description:
Cover for the last terminal in a blockFor separations within one terminal block with terminals of different sizesTouch-protected live partsVisual separation of current circuitsEnd plates can also be used to ensure compliance with air gaps and creep distancesThe outer dimensions ...
Cover for the last terminal in a blockFor ...
Description:
Cover for the last terminal in a blockFor separations within one terminal block with terminals of different sizesTouch-protected live partsVisual separation of current circuitsEnd plates can also be used to ensure compliance with air gaps and creep distancesThe outer dimensions ...
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced ...
Description:
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ...
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design. • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...