1.53 x 0.775 x 0.45in Terminal Cover for use with 12 VA Transformer, 20 VA Transformer

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Chassis Mount Clamp & Frame Construction 115/230Vac Primary Transformer Accessories

Note

2 terminal shrouds required per transformer

Approvals

8888

Standards

BS3535; EN 60 742

Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA

Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Specificaties
Kenmerk Waarde
For Use With 12 VA Transformer, 20 VA Transformer
Dimensions 1.53 x 0.775 x 0.45in
Depth 0.45in
Length 1.53in
Width 0.775in
Accessory Type Shroud
Material Glass Reinforced Nylon
460 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1834 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
0,42
(excl. BTW)
0,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 0,42
50 - 99
€ 0,41
100 - 499
€ 0,40
500 - 999
€ 0,34
1000 +
€ 0,28
Related Products
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
The Drivia distribution cabinets have rows of 13 ...
Description:
The Drivia distribution cabinets have rows of 13 modules and are compliant with regulations governing public and high-rise buildings in accordance with standard EN 60695-2-11. They also conform to IEC 60670-24. The Drivia cabinets have pivoting removable rails can be ...
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...