CFCH Thermal Fan Controller for use with Dimplex CFH Fan Heaters

  • RS-stocknr. 621-8005
  • Fabrikantnummer CFCH
  • Fabrikant Dimplex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

CFCH Multiple Fan Heater Controller

Designed for use with the Dimplex CFH range of industrial fan heaters. The CFCH unit provides control over multiple (upto ten) fan heaters connected via the simple electronic control bus system fitted to all CFH range heaters.

For building heating requirements upto 120kW
Multiple heater control (upto ten) using standard low voltage (CAT5) PC network cable
Fan and heat selection independently controllable using graphical LCD display
Electronic room thermostat with ambient and target temperature display with 1°C adjustment steps
7 day programming with upto 32 individual time programmes
Upto a 5 hour delay run-back timer can be set

Specificaties
Kenmerk Waarde
For Use With Dimplex CFH Fan Heaters
Temperature Profile +30 → +60°C
Dimensions 113 x 217 x 49mm
Height 49mm
Length 113mm
Width 217mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
133,04
(excl. BTW)
160,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 133,04
10 - 24
€ 126,38
25 +
€ 119,73
Related Products
High performance extract/intake fans for use in single ...
Description:
High performance extract/intake fans for use in single and double glazing, and most types of materials up to 32mm thick. A unique speed control pack enables high, medium or low speeds to be preset to suit room size or specific ...
Vent Axia ACM in-line mixed flow duct fans ...
Description:
Vent Axia ACM in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the pressure development of conventional axial fans. Designed and manufactured in the UKSupplied complete for installationCan operate in both horizontal and vertical ...
The A2P interface is a 0-10 volt to ...
Description:
The A2P interface is a 0-10 volt to open collector PWM converter and is designed to work with ebm-papst 4 wire PWM controlled DC fans. The interface translates the analogue voltage input to an equivalent PWM signal. The interface is ...
Designed to control the Xpelair range of GX, ...
Description:
Designed to control the Xpelair range of GX, WX and RX 9in and 12in fans. On/off switch with ’power on’ indicationChoice of high/low speed operationIntake/extract direction controlCan be recess or surface mounted3 year on-site warranty.