Thermal Grease, 1.35W/m·K

  • RS-stocknr. 182-6355
  • Fabrikantnummer HTCX100T
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any surface where thermal conductivity or heat dissipation is important. It should be applied to the base and mounting studs of diodes, transistors, thyristors, heat sinks, silicone rectifiers and semi-conductors, thermostats, power resistors and radiators.

Very low oil bleed and evaporation weight loss
Reduced viscosity for ease of application
Excellent non-creep characteristics
Very wide operating temperature range
Excellent thermal conductivity: 1.35 W/m.K
Low toxicity

Specificaties
Kenmerk Waarde
Thermal Conductivity 1.35W/m·K
Maximum Operating Temperature +180°C
Minimum Operating Temperature -50°C
Pack Size 100mL
Physical State Paste
Operating Temperature Range -50 → +180 °C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
34 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
25,56
(excl. BTW)
30,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 25,56
15 - 39
€ 24,46
40 +
€ 23,48
Related Products
Thermally compound intended for use as thermal interface ...
Description:
Thermally compound intended for use as thermal interface between processors and heatsink. High thermal performance : 0.32°C/W ( TO220 termal test @ 50 psi)Density (g/cc) : 2.1The compound requires pressure of assembly to cause flow.
The CRC 100g zinc conductive adhesive heat sink ...
Description:
The CRC 100g zinc conductive adhesive heat sink compound is an excellent choice for PCBs, control assemblies and electronic components. The thermal paste helps to improve the thermal connection of your processors. Specific gravity of 2.3Excellent moisture bufferHigh thermal conductivityLow ...
HTSX is a silicone thermal interface material (TIM) ...
Description:
HTSX is a silicone thermal interface material (TIM) which has been developed to perform in more extreme conditions than its sister product HTS. It exhibits extended characteristics to HTS, with higher thermal conductivity, extended operating temperatures and excellent stability with ...
A non silicone heat transfer compound containing various ...
Description:
A non silicone heat transfer compound containing various metal oxide (ceramic) powders which give exceptional thermal conductivity. Excellent non creep characteristicsExcellent thermal conductivity even at high temperaturesEasy to handleLow evaporation weight lossWhite colour for ease of identification in ...