Thermal Grease, 3W/m·K

  • RS-stocknr. 182-6357
  • Fabrikantnummer HTSP100T
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

HTSP provides the ultimate in thermal conductivity together with the very wide temperature range obtained by using silicone base oils. The exceptional properties obtained from HTSP are due to the novel use of various metal oxide (ceramic) powders. These materials are electrically insulative to ensure that leakage currents can not be formed if the paste should come into contact with other parts of the assembly.

Superior thermal conductivity even at high temperatures 3.0 W/m.K
Excellent non-creep characteristics
Wide operating temperature range -50°C to +200°C
Low evaporation weight loss

Specificaties
Kenmerk Waarde
Thermal Conductivity 3W/m·K
Maximum Operating Temperature +200°C
Minimum Operating Temperature -50°C
Operating Temperature Range -50 → +200 °C
Physical State Paste
Chemical Component Powdered Metal Oxides, Silicone Oil
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-04-2020, met een levertijd van 1 werkdag.
Prijs Each
76,70
(excl. BTW)
92,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 76,70
15 - 39
€ 73,64
40 +
€ 70,59
Related Products
Thermally compound intended for use as thermal interface ...
Description:
Thermally compound intended for use as thermal interface between processors and heatsink. High thermal performance : 0.32°C/W ( TO220 termal test @ 50 psi)Density (g/cc) : 2.1The compound requires pressure of assembly to cause flow.
Electrolube HTCX is an enhanced version of HTC ...
Description:
Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any ...
HTSX is a silicone thermal interface material (TIM) ...
Description:
HTSX is a silicone thermal interface material (TIM) which has been developed to perform in more extreme conditions than its sister product HTS. It exhibits extended characteristics to HTS, with higher thermal conductivity, extended operating temperatures and excellent stability with ...
Excellent thermal conductivity and dielectric propertiesSilicone free compound ...
Description:
Excellent thermal conductivity and dielectric propertiesSilicone free compound will not harden or dry outNon-corrosiveThermally stable from -5°F/-15°C to 392°F/200°CExceeds MIL-C-47113 for thermal conductivityExcellent heat transfer between circuit components and heat sinks, without any silicone migrationSupplied ...