Phoenix Contact 2A 2 Pole Thermal Magnetic Circuit Breaker, 65 V dc, 250 V ac TMCP 1 M1

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact TMCP M1 Thermomagnetic Circuit Breakers

The TMCP 1 M1 range of plug in thermomagnetic circuit breakers uses the SFB technology to protect against overcurrent and short circuits.
The thermos magnetic devices have a different tripping time depending on the type of overload. The magnetic tripping will interrupt the circuit in milliseconds if there is a high overload current or a short circuit.

Features and Benefits

• IP30 rating
• Automatic fuse type
• Base mounting
• Easy to maintain

Phoenix Contact Circuit Breakers

Specificaties
Kenmerk Waarde
Current Rating 2A
Number of Poles 2
Voltage Rating 65 V dc, 250 V ac
Width 12.5mm
Series TMCP 1 M1 300 2A
Rated AC Voltage 250V
Rated DC Voltage 65V
Overall Length 115mm
Overall Depth 121mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 6
435,48
(excl. BTW)
526,93
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
€ 435,48
€ 72,58
*prijsindicatie
Related Products
IEC Classification S/TO (with module, S/TM),This range of ...
Description:
IEC Classification S/TO (with module, S/TM),This range of low cost switch and circuit breaker are an economic way of providing basic protection for equipment.,Typical tripping times at 2xIN, 20-30 seconds faster time can be achieved with the addition of the ...
IEC Classification S/TO (with modules, S/TM). This range ...
Description:
IEC Classification S/TO (with modules, S/TM). This range of 2 pole sensing thermal switch and circuit breaker offer enhance protection over single pole devices with the added benefit of not being 'polarity' sensitive for wiring purposes. Basic tripping time at ...
IEC classification S/TO,Miniaturised single pole circuit breaker with ...
Description:
IEC classification S/TO,Miniaturised single pole circuit breaker with switching (push-push) function. Reliable snap action and trip-free mechanism. The blade terminals fit into the optional DIN rail sockets. An optional DIN rail socket maybe used. The socket has screw terminals up ...
3/8 inch or M12 (mm) moulded thread-neck single-hole ...
Description:
3/8 inch or M12 (mm) moulded thread-neck single-hole panel mounting6.3-0.8 mm blade terminalsSmall physical sizeTease free, Trip free mechanism for long lifePush to release/push to resetOn/off status indicationOverload and short circuit protectionTypical life 5000 operation at twice nominal current ratingMainly ...