Thermal Interface Pad, Fibreglass, 0.9W/m·K, 41.91 x 28.96mm 0.178mm

  • RS-stocknr. 169-2183
  • Fabrikantnummer SP400-0.007-00-05
  • Fabrikant Bergquist
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Sil-Pad 400 Insulators

The Sil-Pad 400s are silicon rubber and fibreglass-based insulators
This flame retardant material is designed to act as a thermo-conductive insulator
They have excellent mechanical and physical characteristics
They are resistant to cleaning products
The fibreglass reinforcement provides excellent resistance to perforation
The pliable surfaces provide a perfect surface contact as well as excellent thermal dissipation
The Sil-Pad 400s are non-toxic
Applications: used as an insulator between power devices and heatsinks

Specificaties
Kenmerk Waarde
Dimensions 41.91 x 28.96mm
Thickness 0.178mm
Length 41.91mm
Width 28.96mm
Thermal Conductivity 0.9W/m·K
Material Fibreglass
Minimum Operating Temperature -60°C
Maximum Operating Temperature +180°C
Hardness Shore A 85
Material Trade Name Sil-Pad 400
Operating Temperature Range -60 → +180 °C
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2900 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,244
(excl. BTW)
0,295
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
€ 0,244
€ 12,20
250 - 950
€ 0,214
€ 10,70
1000 - 2450
€ 0,187
€ 9,35
2500 - 4950
€ 0,181
€ 9,05
5000 +
€ 0,175
€ 8,75
*prijsindicatie
Related Products
High fin density has more surface area for ...
Description:
High fin density has more surface area for heat transfer, despite small foot printThin fin geometry improves system airflow and reduces fan costsHole pattern fits 1/4 brick DC/DC Converters from top manufacturers like Delta, Emerson and TycoLengthwise and crosswise fin ...
Phase change thermal Interface material with aluminium carrier ...
Description:
Phase change thermal Interface material with aluminium carrier intended for use between a computer processor and a heat sink.,Adhesive on one side,Requires pressure of assembly to cause flow.,Applications: ,Computer and peripherals,Power conversion,High performance computer processor,Power semiconductors ,Power ...
Designed specifically for LED applications, this range of ...
Description:
Designed specifically for LED applications, this range of Insulated Metal Substrates (IMS) also known as Metal Clad Printed Circuit Boards, are designed to allow better thermal management also allowing for more forward current to LEDs. Whilst being able to maintain ...
High-performance insulators, which combine Kapton MT type polyamide ...
Description:
High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer.Electrical insulators and thermal conductors.These replace ceramic insulators used when mechanical resistance is required.Overcomes the risks of breaking.Very good electrical insulation ...