RS PRO Thermistor 5Ω, 15 (Dia.) x 6mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Inrush Current Suppressors

A range of PCB mounting metal oxide ceramic inrush current suppressors which when cold at initial switch on, present a high series resistance and limit current flow
As the devices warm the resistance progressively reduces to allow normal current to flow
The device quickly cools and returns to high resistance when the power is switched off
Suitable for switched mode power supplies, small electric motors, filament lamps, transformers etc

Caution

These suppressors are designed to run at elevated temperatures and need to be hot to achieve low continuous operating resistance. It is therefore important to allow for this when installing them in the circuitry.

//media.rs-online.com/t_line/L210667-01.gif
Specificaties
Kenmerk Waarde
Temperature Coefficient Type NTC
Thermal Time Constant 100s
Resistance @ 25 °C 5 Ω
Tolerance ±20%
Application Protection
Depth 6mm
Dimensions 15 (Dia.) x 6mm
Maximum Operating Temperature +200°C
Minimum Operating Temperature -40°C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
383 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,27
(excl. BTW)
3,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 3,27
10 - 49
€ 2,82
50 - 99
€ 2,49
100 - 249
€ 2,28
250 +
€ 1,83
Related Products
DO-35 packaged NTC thermistors designed for temperature measurement ...
Description:
DO-35 packaged NTC thermistors designed for temperature measurement and control in applications which demand cost effective reliability Typical applications include domestic appliances, automotive systems, data processing equipment and heating/ventilating/air conditioning controlThe hermetically sealed ...
A low cost alternative to the wire-wound platinum ...
Description:
A low cost alternative to the wire-wound platinum resistance sensor. The PCR100 exhibits a base zero resistance of 100Ω and has a linear output with an average sensitivity of 3.85mΩ/°C over the temperature range -40 °C to 150 °C.,The resistor ...
P27 Series NTC thermistors from EPCOS are constructed ...
Description:
P27 Series NTC thermistors from EPCOS are constructed with a UL 94 V-0 flame retardant coating. These NTC thermistors have kinked, tinned copper wire leads with a lead pitch of 7.5 mm. Stable electrical characteristicsSolderable terminals in accordance with IEC ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these R-T curve (Resistance-Temperature) matched thermistors are small, high quality, epoxy encapsulated, precision devices. These epoxy coated interchangeable chip thermistors offer true interchangeability over wide temperature ranges, permitting the circuit designer to ...