Reliance Cast Gun Metal Heatguard TMV3, 15mm BSP

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Heatguard® TMV3-8

A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2゚C regardless of fluctuations in the temperature and pressure of the hot and cold water supplies, and to shut the mixed water outlet instantly in case of hot or cold water failure*

Fully approved by the WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bathfill applications
Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers
Unique, purpose built temperature adjuster tool prevents unauthorised tampering
Provides extreme mixed water temperature stability under changing supply conditions

Note

*Supply conditions must remain within limits stated

Approvals

WRAS
TMV3

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Specificaties
Kenmerk Waarde
Connection 1 in BSP
Body Material Cast Gun Metal
Maximum Working Pressure 16 bar
Connection Size 15mm
Maximum Set Temperature +46°C
Minimum Set Temperature +46°C
Thread Standard or Connection Type BSP
Temperature Setting Range +38 → +46 °C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
149,00
(excl. BTW)
180,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 149,00
Related Products
Special version designed for removing dust, debris and ...
Description:
Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deepPlastic probe jets high pressure air into the hole to dislodge particles which are safely sucked away by the main nozzleMain nozzle shrouded to ...
In separate operation, the cable tie is tensioned, ...
Description:
In separate operation, the cable tie is tensioned, closed and cut directly at the head. By simply replacing the facing plate, the meter can be easily changed for the differing tape widths (6 and 8 mm). Locking pin for the ...
Professional quality tensioning and cutting tool for use ...
Description:
Professional quality tensioning and cutting tool for use with metal cable ties in the MBT and MAT-series. The cable ties are automatically cut off flush with the head when the pre-set tensioning level has been reached. Key Features• Glass-fibre-reinforced housing• ...
Introducing an excellent quality professional cordless grease gun ...
Description:
Introducing an excellent quality professional cordless grease gun from DeWalt. It is powered by 18V battery and has a powerful motor for pushing 147 grams of grease per minute of high-flow applications. The DeWalt DCGG571M1 features a variable speed trigger ...