RS PRO Changeover Thermostats, 10A, 230 V ac, -20 → +35 °C
- RS-stocknr.:
- 375-0152
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 375-0152
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
RS PRO Thermostats, -20°C → +35°C
Easily warm up or cool down your indoor space with this thermostat from RS PRO. This handy system works with both heating and cooling systems, such as air conditioning units.
Its simple, white interface has a control dial that can be adjusted by turning to the easy-to-read, grey numbered temperature markings. Installation is easy with a helpful wall mount on the back of the device. You'll commonly find it in both commercial and domestic settings, such as restaurants, shops, workshops or garages. Users can set the thermostat to temperatures between -20°C and +35°C.
The changeover switch means it can run on a 24 V battery if needed, but it's usually powered by an electricity mains supply of 230 V. As part of the RS PRO range, it's been stringently tested for durability, reliability and safety.
Its simple, white interface has a control dial that can be adjusted by turning to the easy-to-read, grey numbered temperature markings. Installation is easy with a helpful wall mount on the back of the device. You'll commonly find it in both commercial and domestic settings, such as restaurants, shops, workshops or garages. Users can set the thermostat to temperatures between -20°C and +35°C.
The changeover switch means it can run on a 24 V battery if needed, but it's usually powered by an electricity mains supply of 230 V. As part of the RS PRO range, it's been stringently tested for durability, reliability and safety.
Features and Benefits
• Contact rating of 10 (4) A and 5 (2) A
• Changeover switch configuration
• Supply voltage of 230 V AC
• Temperature range of -20°C to +35°C
• Packed in conditions that meet ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards for safety and quality
• Changeover switch configuration
• Supply voltage of 230 V AC
• Temperature range of -20°C to +35°C
• Packed in conditions that meet ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards for safety and quality
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
|---|---|
| Contact Rating | 10 A, 5A |
| Switch Configuration | Changeover |
| Supply Voltage | 230 V ac |
| Maximum Temperature | +30 °C |
| Minimum Temperature | -20 °C |
| Temperature Range | -20 → +35 °C |