Loctite 222 Purple Thread lock, 50 ml, 6 h Cure Time

  • RS-stocknr. 496-007
  • Fabrikantnummer 231501
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 222 Threadlocking Adhesives

Lower strength threadlocking grade for fasteners requiring subsequent adjustment
Distinctive purple colour to aid identification
Thixotropic to prevent migration from the point of application
Lubricates threads during assembly
Easy to remove components
Ideal for non-ferrous components e.g. brass and aluminium

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Thread lock

The Loctite 50ml purple thread lock is designed for locking and sealing of threaded fasteners, which requires easy disassembly with standard hand tools. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. It is particularly suitable for applications such as adjustment of setscrews, small diameter or long engagement length fasteners, where easy disassembly is required without damaging the screw. The thixotropic nature of Loctite 222 reduces the migration of liquid product after application to the substrate.

Features and Benefits

• Prevents loosening on vibrating assemblies
• Medium strength
• Permits disassembly with hand tools
• Especially suited to small thread sizes
• Lubricates threads during assembly
• Cure time is 24 hours
• Easy to remove components
• Ideal for non-ferrous components, e. G. brass and aluminium
• Medium viscosity of 3500mPa/s
• Operating temperature ranges between -55⁰C and 180⁰C

Applications

• Pumps
• Gear boxes
• Presses

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Trade Name Loctite 222
Application Threadlocking
Material Compatibility Metal
Threadlocking Strength Medium
Cure Time 24 h
Anaerobic Yes
Colour Purple
Product Form Liquid
Package Type Bottle
Package Size 50 ml
Maximum Operating Temperature +150°C
Minimum Operating Temperature -55°C
Operating Temperature Range -55 → +150 °C
Viscosity Measurement 3500mPa/s
Odour Characteristic
Chemical Composition Dimethacrylate Ester
Viscosity Description Low Viscosity
Special Features Anaerobic
29 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
224 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
52,42
(excl. BTW)
63,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 52,42
6 - 14
€ 50,32
15 +
€ 49,27
Related Products
Medium strength oil tolerant torque tension gradeGeneral purpose ...
Description:
Medium strength oil tolerant torque tension gradeGeneral purpose threadlockingParticularly suitable for less active surfaces e.g. stainless steelPrevents loosening through vibration and leakage of threaded fasteners.
Opaque red liquid varnish that forms an insulating, ...
Description:
Opaque red liquid varnish that forms an insulating, translucent film when dry for locking screws into place.Locks screws and wires. Locks screws in electrical and electronic assemblies. Maintains wires on coils.Opaque liquid varnish that forms a red translucent film. Insulating ...
High-strength anaerobe screwlock, for long-term sealing of thread ...
Description:
High-strength anaerobe screwlock, for long-term sealing of thread connectionsResistant to chemicals, depending on the medium, suitable for temperatures from -55 → 150 °CRelease torque 20 NmDismantling only possible after heating to 250°CPrevents independent loosening and seal breaks caused by impact ...
Designed for the bonding of cylindrical fitting partsAbsence ...
Description:
Designed for the bonding of cylindrical fitting partsAbsence of air between close fitting metal surfaces cures the productPrevents leakage and loosening from shock and vibrationApplications include: Holding gears and sprockets onto gearbox shafts and rotors on electric motor shaftsHealth and ...