Loctite 270 Pipe & Thread Sealant Liquid for Threadlocking. 250 ml Bottle, -55 → +180 °C

  • RS-stocknr. 200-9582
  • Fabrikantnummer 1335906
  • Fabrikant Loctite
Wetgeving en compliance
Land van herkomst: IE

Loctite Pipe & Thread Sealant Liquid

The Loctite green 250ml pipe and thread sealant green liquid is designed for permanent locking and sealing of threaded fasteners. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. It is particularly suited for heavy-duty applications such as studs into motor housings, nuts onto studs in pump housings and other fasteners where high strength is required. This product is composed of methacrylate and provides robust curing performance. It not only works on active metals (brass, copper, etc.) but also on passive substrates such as stainless steel and plated surfaces. This product offers high-temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.

Features and Benefits

Cure time is 24 hours

High-strength general thread locker for maximum efficiency

Low viscosity
Operating temperature ranges between -55⁰C and 180⁰C
Prevents loosening on vibrating assemblies (pumps, gearboxes or presses)
Proven to be tolerant of minor contamination due to industrial oils (motor oils, corrosion prevention oils and cutting fluids)
Permits disassembly with hand tools
Can be disassembled by heating to 300°C


Works on all the metals, including passive substrates (stainless steel, aluminium and plated surfaces)
Thread locking


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Kenmerk Waarde
Trade Name Loctite 270
Application Threadlocking
Cure Time 24 h
Anaerobic Yes
Colour Green
Product Form Liquid
Package Type Bottle
Package Size 250 ml
Maximum Operating Temperature +180°C
Minimum Operating Temperature -55°C
Special Features Anaerobic
Operating Temperature Range -55 → +180 °C
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 209,12
Related Products
The ITW Devcon epoxy putty is a two-part, ...
The ITW Devcon epoxy putty is a two-part, steel-filled liquid substance that can be cast over models for accurate detail reproduction. It can be used for holding fixtures, light-gauge forming dies, and moulds. Fast curing and self levelling compound Reproduces ...
The Loctite 114g epoxy putty is a versatile, ...
The Loctite 114g epoxy putty is a versatile, single-part, easy-to-use steel filled substance. When cured it has high compressive strength and good adhesion to most of the surfaces. Single-component, steel-based epoxide adhesive for kneadingIdeal for long-lasting fast repairsApplications: repairing small ...
Intumescent pillows consist of a durable glass fibre ...
Intumescent pillows consist of a durable glass fibre cloth containing a mixture of non-hazardous exfoliating fillers. The pillows can be tightly packed into voids to form both temporary and permanent fire barriers with service penetrations in block work, partition walls, ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.