Loctite 243 Pipe & Thread Sealant Liquid for Threadlocking. 50 ml Bottle, -55 → +180 °C

  • RS-stocknr. 408-4080
  • Fabrikantnummer 1335885
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Loctite® 243 Threadlocking

Medium strength oil tolerant torque tension grade
General purpose threadlocking
Particularly suitable for less active surfaces e.g. stainless steel
Prevents loosening through vibration and leakage of threaded fasteners

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

This Loctite 243 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. It offers high temperature performance and oil tolerance.

Features:

  • Technology: Acrylic

  • Chemical Type: Dimethacrylate ester

  • Fluorescence: Positive under UV light

  • Components: One component - requires no mixing

  • Viscosity: Medium, thixotropic

  • Cure: Anaerobic

  • Secondary: Cure Activator

  • Application: Threadlocking

  • Strength: Medium

How to use Loctite 243?

  • Clear all surfaces (external and internal) with a cleaning solvent and allow to dry

  • Cure speed too slow? You need to use appropriate activator and then allow to dry it when needed

  • Shake it before use

  • To prevent the Loctite 243 from clogging in the nozzle, avoid tip and metal surface get in contact during application

  • Store in dry location

How to clean Loctite 243 after using?

It could be removed with a combination of soaking in a solvent and wire brush.

Where can you use Loctite 243?

It works on active metals such as brass or copper as well as on passive substrates ie. stainless steel and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Benefits

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Trade Name Loctite 243
Application Threadlocking
Cure Time 2 h
Anaerobic Yes
Colour Blue
Product Form Liquid
Package Type Bottle
Package Size 50 ml
Maximum Operating Temperature +180°C
Minimum Operating Temperature -55°C
Special Features Anaerobic
Viscosity Description Thixotropic
Operating Temperature Range -55 → +180 °C
51 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
595 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
52,63
(excl. BTW)
63,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 52,63
Related Products
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.