Volkel Precision Thread Plug Gauge Set, Metric, M10, M12, M3, M4, M5, M6, M8 With RS Calibration

  • RS-stocknr. 189-3324
  • Fabrikantnummer 16026 +Cal
  • Fabrikant Volkel
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap). The scrap side of the thread plug gauge must not be able to be manually turned more than two turns into the cut thread (without using excessive force). If it can be screwed in more, the thread does not meet the requested standards (=scrap). The reference temperature for parts and gauges is 20° Celsius.

Specificaties
Kenmerk Waarde
Set Type Plug
Number of Pieces 7
Imperial or Metric Metric
Thread Size M10, M12, M3, M4, M5, M6, M8
Calibrated RSCAL
Single or Double Ended Double
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
687,90
(excl. BTW)
832,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 687,90
Related Products
The Volkel Go ring gauge M5x0.8 is calibrated ...
Description:
The Volkel Go ring gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. This thread NO-GO ring gauge must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge ...
The Volkel No-Go ring gauge M8x1.25 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x1.25 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
The Volkel Go No-Go Plug Gauge M5x0.8 is ...
Description:
The Volkel Go No-Go Plug Gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go No-Go plug gauge M4x0.7 is ...
Description:
The Volkel Go No-Go plug gauge M4x0.7 is a combination of go and No-Go plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread ...