Go No-Go Plug Gauge M14

  • RS-stocknr. 177-0521
  • Fabrikantnummer 16027
  • Fabrikant Volkel
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Volkel Go No-Go Plug Gauge

The Volkel Go No-Go plug gauge M14x2 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more than two threads. If unable to do so, the thread does not meet the requested standards. The reference temperature for parts and gauges is 20°C. It is made from high-quality raw material. This gauge is mostly used as an inspection tool.

Features and Benefits

• Metric measurement system
• 6H tolerance
• High durability and reliability
• Compact in size and rugged
• Easy to use
• Accurate
• Double ended gauge

Certifications

• ISO1502
• DIN13

Certifications

• ISO1502
• DIN13

Specificaties
Kenmerk Waarde
Plug/Ring Plug
Gauge Type Go/No Go
Thread Size M14 x 2
Tolerance 6H
Single or Double Ended Double
Imperial or Metric Metric
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
73,10
(excl. BTW)
88,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 73,10
Related Products
The Volkel Go ring gauge M2x0.5 is calibrated ...
Description:
The Volkel Go ring gauge M2x0.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go No-Go plug gauge M20x2.5 is ...
Description:
The Volkel Go No-Go plug gauge M20x2.5 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread ...
The Volkel Go ring gauge M10x1.5 is calibrated ...
Description:
The Volkel Go ring gauge M10x1.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
A thread limit plug gauge is a combination ...
Description:
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into ...