Camloc by Alcoa Thread Repair Insert, M8 x 1.25, Drill Size 9.5mm

  • RS-stocknr. 668-4676
  • Fabrikantnummer KNM8X1.25
  • Fabrikant Keenserts
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specificaties
Kenmerk Waarde
Thread Size M8 x 1.25
Drill Size 9.5mm
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 5
34,00
(excl. BTW)
41,14
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 34,00
€ 6,80
*prijsindicatie
Related Products
The Dewalt 10.8 V XR Hammer Drill has ...
Description:
The Dewalt 10.8 V XR Hammer Drill has been engineered to be heavy-duty yet designed to be ultra-compact. The lightweight design makes this drill perfect for use within confined spaces. It features 16 adjustable torque positions for consistent screwdriving into ...
Introducing the DeWALT DCD cordless drill series. This ...
Description:
Introducing the DeWALT DCD cordless drill series. This precise and powerful drill allows you to work more efficiently in tight and confined spaces where access is limited. The LED light feature also offers better visibility in areas that may not ...
Metric High Speed Steel die nuts for repairing ...
Description:
Metric High Speed Steel die nuts for repairing brusied threads or extending stud threaded sections. Manufactured to BS1127; 1950 standardIdeal for use in areas where access is limited.
Recoil helically wound wire thread inserts can be ...
Description:
Recoil helically wound wire thread inserts can be used to strengthen threads, giving applications a longer life. Each insert shares the load over the entire bolt and hole, improving holding or pull out resistance, providing a more even distribution of ...