RS Components
Onze website gebruikt cookies en soortgelijke technologieën om u nog beter van dienst te zijn bij het zoeken of het plaatsen van een bestelling, voor analytische doeleinden en om advertenties te personaliseren.
 
Fabrikantnummer

Keenserts Thread Repair Insert, M10 x 1.5, Drill Size 13.5mm


38 - levertijd is 1 werkdag(en) (EU-voorraad)
45 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Add to Basket

Prijs 1 Bag of 3

€ 26,50

(excl. BTW)

€ 32,06

(incl. BTW)

Bag(s)

Toegevoegd

RS-stocknr.:
668-4702
Fabrikantnummer:
KNHM10X1.5
Fabrikant:
Keenserts

N.v.t.

Land van herkomst:
DE
Bag(s)Per zakPer stuk*
1 +€ 26,50€ 8,833
*prijsindicatie

Keenserts Inserts



The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.


Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions


KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691


KenmerkWaarde
Thread SizeM10 x 1.5
Drill Size13.5mm