Keenserts M10 x 1.5 Threaded Insert Hand Tool

  • RS-stocknr. 668-4698
  • Fabrikantnummer KRTM10-01
  • Fabrikant Keenserts
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specificaties
Kenmerk Waarde
Thread Size Range M10 x 1.5
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
86,66
(excl. BTW)
104,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 86,66
Related Products
High quality, high speed steelMetric coarse series threadPolypropylene ...
Description:
High quality, high speed steelMetric coarse series threadPolypropylene storage caseM3 - M6 sizes are 13/16 in (20mm) diameterM8 - M12 sizes are 1 5/16 in (33mm) diameter.
Our own brand, RS Pro insert riveter tool ...
Description:
Our own brand, RS Pro insert riveter tool enables users to easily and effortlessly fasten and unfasten rivet nuts. This unique tool, which can sometimes be referred to as a set of rivet nut plyers. A riveting tool is most ...
Tough, impact resistant handleHigh speed steel tap for ...
Description:
Tough, impact resistant handleHigh speed steel tap for a clean cut and long lifePrecision ground threads for accurate threading50 mm long blade for improved accessTotal length: 113 mmThread pitch: 0,6 mm.
Recovers and repairs a damaged thread.Set supplied with ...
Description:
Recovers and repairs a damaged thread.Set supplied with different lengths and dimensions of HELICOIL® plus threaded inserts, drill bits, HSS manual threads, manual pins, tang breakers.Green colour to check the thread is present after fitting.