Dormer Threading Tap, M4 Thread, 0.7mm Pitch, Metric Standard, Machine Tap
- RS-stocknr.:
- 240-3164
- Fabrikantnummer:
- E500 4.0 X 0.70 3FL TPR
- Fabrikant:
- Dormer
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
330 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 7,61
(excl. BTW)
€ 9,21
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 7,61 |
| 10 - 24 | € 7,30 |
| 25 + | € 7,07 |
- RS-stocknr.:
- 240-3164
- Fabrikantnummer:
- E500 4.0 X 0.70 3FL TPR
- Fabrikant:
- Dormer
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- SE
Productomschrijving
Dormer Threading Tap, Right-Hand Thread Direction, 7° Cutting Angle - E500 Series - E500 4.0 X 0.70 3FL TPR
Add threads to your metalwork with this threading tap from Dormer. It's a versatile choice that you can control by hand or with a machine to create blind or through-holes. This product works with an array of materials, including cast iron, steel, copper, alloys and plastics, so there's no need to use separate tools for each one.
Features & Benefits
• Industry-standard M4 thread size for wide compatibility with fasteners
• HSS material withstands impact and wear, delivering long-term performance
• Pitch of 0.7mm for increased thread strength and stability
• HSS material withstands impact and wear, delivering long-term performance
• Pitch of 0.7mm for increased thread strength and stability
Applications
• Automotive manufacturing
• Construction sites
• Plumbing
• Repair and maintenance
• Construction sites
• Plumbing
• Repair and maintenance
Why is pitch important?
Pitch is the distance that your screw travels after a single full turn. A shorter pitch indicates a stronger connection that's suited to more demanding applications.
Standards
ISO529
Contents
7777
Specificaties
Kenmerk | Waarde |
|---|---|
| Thread Size | M4 |
| Set Type | Threading Tap |
| Type | Straight Flute, Taper |
| Pitch | 0.7mm |
| Thread Standard | Metric |
| Thread Direction | Right Hand |
| Shank Standard | DIN |
| Overall Length | 53 mm |
| Number of Pieces | 1 |
| Hand/Machine Tap | Machine Tap |
| Material | HSS |
| Shank Diameter | 4 mm |
| Class of Fit | 6H |