RS PRO Tap & Drill Set, M4 x 0.7mm Thread, 0.7mm Pitch, Metric Coarse Standard
- RS-stocknr.:
- 749-5682
- Fabrikant:
- RS PRO
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
907 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 set
€ 9,64
(excl. BTW)
€ 11,66
(incl. BTW)
| Set(s) | Per set |
| 1 + | € 9,64 |
- RS-stocknr.:
- 749-5682
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Straight Flute M4 Tap and Drill Set
A tough straight flute threading tap designed to cut a precise, clean M4 thread and the corresponding 3.3mm drill bit.
A versatile tap and drill set for use on a wide range of materials including metal, wood and plastic and designed for power tool use.
Both the M4 tap and the drill bit are constructed from High Speed Steel (HSS) for a temperature and corrosion resistant, durable set that won’t crack or splinter under pressure or when used at high speeds. The drill bit features a 118⁰ point angle and is chemically blackened and ground for increased hardness.
As a straight flute thread the tap is perfect for cutting threads on blind or through holes, capturing the chips in the flutes to leave a clean thread for bolts and fittings.
Features and Benefits
- Tap and drill kit
- Fully ground 3.3mm drill with black finish (DIN 338)
- M4 tap with metric coarse thread (ISO529)
- 0.7mm pitch
- HSS construction
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Specificaties
Kenmerk | Waarde |
|---|---|
| Set Type | Threading Tap Set |
| Thread Size | M4 x 0.7mm |
| Type | Tap and Drill Set |
| Pitch | 0.7mm |
| Thread Standard | Metric Coarse |
| Thread Direction | Right Hand |
| Number of Pieces | 2 |
| Material | HSS |
| Shank Type | Plain |