KOA BPR Series Solder Metal Plate Resistor 100mΩ ±5% 5W ±350ppm/°C

  • RS-stocknr. 182-5809
  • Fabrikantnummer BPR58CR10J
  • Fabrikant KOA
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

KOA Resistor

The KOA resistor is a BPR series solder metal plate ceramic technology radial resistor with a tolerance of ±5% and resistance of 100mohm. The power rating of the resistor is 5W and temperature coefficient resistance (TCR) of ±350ppm/°C.

Features and Benefits

• Automatic insertion for a 5mm pitch between terminals is applicable (26 type, 58 type)
• Flame retardant resistors in ceramic case
• Low inductance
• Marking: Alpha/numeric marking
• Operating temperature ranges between -40°C to 200°C
• Power type current detecting resistors
• Space saving

Specificaties
Kenmerk Waarde
Resistance 100 mΩ
Power Rating 5W
Composition Metal Plate
Tolerance ±5%
Axial/Radial Radial
Technology Ceramic
Series BPR
Minimum Operating Temperature -40°C
Lead Pitch 9mm
Maximum Operating Temperature +200°C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 10)
1,645
(excl. BTW)
1,99
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 10
€ 1,645
€ 16,45
20 +
€ 1,494
€ 14,94
*prijsindicatie
Related Products
The MPC Series metal plate resistor element is ...
Description:
The MPC Series metal plate resistor element is built in special alloy of Ni/Cr/Fe/Cu which creates an uniform distribution of temperature over the resistive element. The metal band element is housed in and hermetically closed ceramic case. Safety design of ...
PWR4412-2S series bare metal element resistors with a ...
Description:
PWR4412-2S series bare metal element resistors with a rugged construction designed for current shunt and current sensing applications. These PWR4412-2S bare metal element resistors have a high current capability, a low inductance of less than 10 nH, low ohmic and ...
The resistive element comprises a metal oxide film ...
Description:
The resistive element comprises a metal oxide film deposited on a ceramic former. The element is protected by a flameproof coating which will withstand overload conditions without flame or mechanical damage. They are recommended for use in applications such as ...
TE Connectivity SQ series high power resistors featuring ...
Description:
TE Connectivity SQ series high power resistors featuring fine non-alkali ceramic cores embodied in ceramic cases and sealed with inorganic silica filler. This provides the SQ series with high insulation resistance, low surface temperature, excellent TCR and an entirely fireproof ...