TE Connectivity ROX3S Series Axial Metal Film Fixed Resistor 47Ω ±5% 3W ±300ppm/°C

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity ROX3S Series 3W Power Metal Oxide Film Resistors

The ROX3S Series of Power Metal Oxide Film Resistors from TE Connectivity provide high power with a compact, space-saving size. The ROX3S series is ideal for line protection applications, they are flame proof as well as being able to withstand overload conditions. Their excellent long-term stability allows for assuring in application as well as providing reliability over time.

The resistors are compatible for processing on automatic insertion equipment as well as with cutting and bending machines.

• High power in a compact form
• Excellent long-term stability
• 3W Rated dissipation at 70°C
• ±5% Resistance tolerance
• ±300ppm/°C Temperature coefficient
• 350V Limiting element voltage
• 600V (max.) Overload voltage
• 1000MΩ Insulation resistance
• Solvent resistant coating
• High surge/overload capacity
• Complete flameproof construction

The ROX series of resistors comprise of a metal oxide film deposited onto a high quality alumina former. Attention to materials and processing quality allow a reduced physical size for each of the three power ratings with very good long term stability. The end cap and welded wire construction ensure high mechanical stability and strength. A specially formulated coating protects the element from environmental conditions and will withstand overload conditions without flame or mechanical damage. Recommended uses include all applications where overload conditions must not cause flaming. Value and tolerance markings is by four band colour code in accordance with IEC62. Rated at 70°C mounted horizontally in free air. Climatic category 55/235/56.

Specificaties
Kenmerk Waarde
Resistance 47 Ω
Power Rating 3W
Tolerance ±5%
Technology Metal Oxide
Series ROX3S
Minimum Operating Temperature -55°C
Maximum Operating Temperature +235°C
930 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1320 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,323
(excl. BTW)
0,391
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 0,323
€ 3,23
100 - 240
€ 0,137
€ 1,37
250 - 490
€ 0,098
€ 0,98
500 +
€ 0,069
€ 0,69
*prijsindicatie
Verpakkingsopties
Related Products
ERA 6A metal film resistors from Panasonic offer ...
Description:
ERA 6A metal film resistors from Panasonic offer stability in high humidity and high temperature environments, while remaining highly accurate. This series of 0805 chip resistors offers a high performance solution. AEC-Q200 qualifiedSmall temperature coefficient of resistanceSmall resistance toleranceExcellent ...
High stability metal film resistors. Extremely low current-noise ...
Description:
High stability metal film resistors. Extremely low current-noise level with low temperature coefficient and close tolerance. LR Series are superior quality metal film resistors with 1% tolerance and temperature coefficients down to 50 ppm3 case sizes are available in 0.25, ...
A homogeneous film of metal alloy is deposited ...
Description:
A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated ...
TE Connectivity R series precision metal film resistors ...
Description:
TE Connectivity R series precision metal film resistors with a tolerance of 0.1% and a temperature coefficient of 15ppm. The R series precision metal film resistors have outstanding stability under load and severe environmental conditions, making them ideally suited for ...