RS PRO RS Series Axial Fixed Resistor 2.2kΩ ±5% 0.25W -500 → +350ppm/°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Carbon Film Resistors 0.25W

The RS PRO series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. The carbon film is the most common axial leaded resistor which is used for applications where a very good tolerance and temperature coefficient are not necessary.

Features

Available in resistances from 1 Ohm to 9.1 mOhm
0.25W power rating
5% tolerance
Resistor body 2.3 mm in diameter, 6.3 mm in length
Carbon film construction
Long-term stability
Solder plated copper leads

Benefits of Carbon Composition

Carbon composition resistors are made from a moulded carbon powder that has been mixed with a phenolic resin to bind and create a uniform resistive body. It is then surrounded in an insulating case after attaching end leads. Carbon composition resistors are used in applications in which the initial tolerance does not need to be any closer than +/- 5% of the value.

What does the power rating mean?

The power rating of a resistor describes the amount of power that the resistor can dissipate safely.

What do the colours mean?

Each of the colour bands has a specific meaning. The first two colours give the base value of the resistor, the next gives the multiplier and the final band the tolerance. If a resistor has five bands, it is a more precise resistor, in which the first three bands represent the base values, and the fourth and fifth represent the multiplier and tolerance respectively.

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Power at 70°C 0.25W
Resistance Tolerance ±5%
Temperature Coefficient  
<100KΩ +350ppm to -500ppm
100KΩ to 1MΩ 0ppm to -700ppm
>1MΩ 0ppm to -1500ppm
Operating Temperature -55 to +155 °C
Lead length 28mm
Lead diameter 0.55mm ±0.03mm

A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Specificaties
Kenmerk Waarde
Resistance 2.2 kΩ
Power Rating 0.25W
Tolerance ±5%
Technology Carbon Film
Series RS
Maximum Operating Temperature +155°C
Minimum Operating Temperature -55°C
5000 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
95000 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5000)
0,006
(excl. BTW)
0,007
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5000 - 5000
€ 0,006
€ 30,00
10000 - 10000
€ 0,006
€ 30,00
15000 - 15000
€ 0,006
€ 30,00
20000 - 20000
€ 0,006
€ 30,00
25000 +
€ 0,006
€ 30,00
*prijsindicatie
Related Products
3521 series low profile high power resistors featuring ...
Description:
3521 series low profile high power resistors featuring a small size to power ratio. Although suitable for a variety of applications, the short lead structure of the 3521 resistor series makes these devices particularly suitable for high frequency operations. 2512 ...