Aluminium Timing Belt Pulley, 9mm Belt Width x 3mm Pitch, 14 Tooth,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Part of an extensive range of High Torque Drive (HTD) timing pulleys in pilot bore type and taper lock bush type. The material used for smaller pulleys is Aluminium, medium sizes are in Steel, larger sizes in Cast Iron, all featuring flanges made from steel. HTD, CXP and CXA belts are all designed to run on these pulleys.

Specificaties
Kenmerk Waarde
Number of Teeth 14
Pitch 3mm
To Suit Belt Width 9mm
Outside Diameter 16mm
Hub Diameter 16mm
Material Aluminium
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
5,35
(excl. BTW)
6,47
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 5,35
5 - 9
€ 5,14
10 - 24
€ 5,03
25 +
€ 4,91
Related Products
These pulleys are designed to be used with ...
Description:
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitchSuitable for belts 6.4mm ( 1/4 in.) and ...
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
8mm pitch x 30mm wide beltManufactured from high ...
Description:
8mm pitch x 30mm wide beltManufactured from high strength steelDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft size.
Aluminium timing pulleys to suit all polyurethane timing ...
Description:
Aluminium timing pulleys to suit all polyurethane timing beltsExcept for 48 and 60 tooth, all pulleys have flanges and all have standard pilot bores.