TE Connectivity Single Pole Double Throw (SPDT) Toggle Switch, Latching, Panel Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Toggle Switches, Min, Professional

Slow make-and-break action
Chrome-plated lever
Solder bucket terminals
A waterproof cover stock no. 321-212 is available (see accessories)
Silver contacts apart from stock nos. 317-077 317-106 317-099 317-112 317-128 and 317-083 which have gold contacts
0.4VA max load
Glass Filled Polyester case

Note

Care should be taken when soldering not to overheat the switch assembly
For biased switches '(on)' refers to momentary 'on' position

Approvals

CSA

//media.rs-online.com/t_line/L316973-01.gif
//media.rs-online.com/t_line/L344710-01.gif

Approvals

CSA

Specificaties
Kenmerk Waarde
Contact Configuration Single Pole Double Throw (SPDT)
Switch Operation Latching
Contact Current Rating 4 A @ 30 V dc
Mounting Type Panel Mount
Terminal Type Through Hole
Panel Cut Out Diameter 6.2mm
Actuator Length 11.5mm
Actuator Material Chrome Plated Brass
Contact Resistance 10mΩ
Standards Met CSA Recognised, RoHS, UL 94V-0
Maximum Operating Temperature +80°C
Mechanical Life 100000Operations
Minimum Operating Temperature -20°C
Contact Material Fine Silver
Operating Temperature Range -20 → +80°C
185 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1574 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,73
(excl. BTW)
8,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 6,73
25 - 49
€ 5,54
50 - 99
€ 5,34
100 - 249
€ 5,28
250 +
€ 5,04
Related Products
Miniature VDE approved toggle switch with an insulating ...
Description:
Miniature VDE approved toggle switch with an insulating cover bonded onto the operating lever. Connections via solder lugsTerminations are epoxy resin sealed.
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
Toggle switches with silver plated contacts sealed to ...
Description:
Toggle switches with silver plated contacts sealed to prevent the ingress of dust or liquidsConnection via 250in. (1/4in.) receptacles or solderingFor biased operation ’(on)’ refers to momentary on positionBrass actuator and Glass Filled Polyester case.
Vertical and two types of right angle terminations ...
Description:
Vertical and two types of right angle terminations availableSuitable for low level switching applicationsTotally sealed, suitable for immersion cleaningWave solderable, will withstand 260°C for 5 secondsGold plated brass terminalsBrass actuator and PBT caseMinimum load current: 10mA at 50mV - 10μA ...