TE Connectivity Four Pole Double Throw (4PDT) Toggle Switch, On-On-On

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Toggle Switches, Min, Professional

Slow make-and-break action
Chrome-plated lever
Solder bucket terminals
A waterproof cover stock no. 321-212 is available (see accessories)
Silver contacts apart from stock nos. 317-077 317-106 317-099 317-112 317-128 and 317-083 which have gold contacts
0.4VA max load
Glass Filled Polyester case

Note

Care should be taken when soldering not to overheat the switch assembly
For biased switches '(on)' refers to momentary 'on' position

Approvals

CSA

//media.rs-online.com/t_line/L316973-01.gif
//media.rs-online.com/t_line/L344710-01.gif

Approvals

CSA

Specificaties
Kenmerk Waarde
Contact Configuration Four Pole Double Throw (4PDT)
Switch Operation On-On-On
Contact Current Rating 6 A @ 250 V ac
Terminal Type Through Hole
Actuator Length 10.5mm
Contact Resistance 10mΩ
Maximum Operating Temperature +80°C
Operating Temperature Range -20 → +80°C
Mechanical Life 100000Operations
Minimum Operating Temperature -20°C
Contact Material Fine Silver
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
52 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
23,27
(excl. BTW)
28,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 23,27
10 - 19
€ 20,62
20 +
€ 18,31
Related Products
Toggle switches with silver plated contacts sealed to ...
Description:
Toggle switches with silver plated contacts sealed to prevent the ingress of dust or liquidsConnection via 250in. (1/4in.) receptacles or solderingFor biased operation ’(on)’ refers to momentary on positionBrass actuator and Glass Filled Polyester case.
Waterproof switches with a threaded bush for panel ...
Description:
Waterproof switches with a threaded bush for panel mountingPCB mountGold over Silver contactsBrass actuator and Glass Filled Nylon 6//6 caseDimensions: Height: 12.7mm, Depth 34.29mm, Depth behind panel: 15.24mm, Actuator length 7.62 mm.
Vertical and two types of right angle terminations ...
Description:
Vertical and two types of right angle terminations availableSuitable for low level switching applicationsTotally sealed, suitable for immersion cleaningWave solderable, will withstand 260°C for 5 secondsGold plated brass terminalsBrass actuator and PBT caseMinimum load current: 10mA at 50mV - 10μA ...
The NKK M Series of waterproof toggle switches ...
Description:
The NKK M Series of waterproof toggle switches have distinctive characteristics. They are of superb quality and construction design. The design prohibits entry of harmful particles that may otherwise compromise the lever operation. The polished chrome-plated actuator adds to the ...