RS PRO Single Pole Double Throw (SPDT) Toggle Switch, Latching, IP67, PCB

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Straight Mounted Toggle Switches

Toggle switches designed for low-level signal switching
Terminations sealed with epoxy resin
Brass actuator with O-ring seal to IP67
Glass filled nylon 6//6 case (UL94V-0)
Gold contacts

Specificaties
Kenmerk Waarde
Contact Configuration Single Pole Double Throw (SPDT)
Switch Operation Latching
Contact Current Rating 400 mA @ 20 V
Mounting Type PCB
Terminal Type Through Hole
IP Rating IP67
Actuator Length 6.1mm
Actuator Material Brass
Contact Resistance 20mΩ
Mechanical Life 30000Cycles
Minimum Operating Temperature -30°C
Contact Material Gold
Operating Temperature Range -30 → +85°C
Standards Met RoHS & Lead Free
Maximum Operating Temperature +85°C
371 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
981 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,45
(excl. BTW)
4,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 3,45
50 - 99
€ 3,19
100 - 249
€ 1,54
250 - 499
€ 1,30
500 +
€ 1,19
Related Products
Insulated toggle switches, moulded in nylon 6.6 and ...
Description:
Insulated toggle switches, moulded in nylon 6.6 and BEAB approved to EN61058-1Connection by 250 ( 1/4 in. push-on receptacles, or soldering)For use where metal switches are unsuitableSuitable for Class II double insulated equipmentIP40Polycarbonate actuator and Nylon 6.6 case.
Attractive, ergonomically designed switches with illuminated paddle style ...
Description:
Attractive, ergonomically designed switches with illuminated paddle style actuators Available in colourful illuminated green, amber and red versions Round snap-in mounting switches, easy to install in panel Nylon housing to UL 94V-2Fitted with 4.8mm blade style terminals.
Waterproof switches with a threaded bush for panel ...
Description:
Waterproof switches with a threaded bush for panel mountingPCB mountGold over Silver contactsBrass actuator and Glass Filled Nylon 6//6 caseDimensions: Height: 12.7mm, Depth 34.29mm, Depth behind panel: 15.24mm, Actuator length 7.62 mm.
Switches suitable for PCB mounting with pins arranged ...
Description:
Switches suitable for PCB mounting with pins arranged on a 0.1 in pitch gridRight angle versions have two additional support pinsIdeal where either panel space or board size is at a premiumSuitable for low level switching applicationsTerminals epoxy sealed against ...