Norbar Torque Tools 1/2 in Digital Torque Calibration Analyser, Range 10 → 350Nm ±1 % Accuracy

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

TruCheck Plus

Some customers require more flexibility than the basic TruCheck model, the 'Plus' adds a comprehensive range of features. With three modes of operation the TruCheck Plus is suitable for click wrenches, dial and electronic wenches and in 'track' mode will continuously monitor the torque signal.

There are three torque units: N·m, lbf·ft and lbf·in.

TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the result by illuminating one of three coloured LEDs: orange = low, green = OK, red = high.

TruCheck Plus has an RS-232 output and comes complete with an RS-232 cable. The reading measurement unit and limit status (Low, OK and High) are output via RS-232.

With three modes of operation the TruCheck Plus is suitable for click wrenches, dial and electronic wenches and in 'track' mode will continuously monitor the torque signal.
There are three torque units: N·m, lbf·ft and lbf·in.
TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the result by illuminating one of three coloured LEDs.

There are three torque units - N.m, lbf.ft and lbf.in (always calibrated in N.m).
Allows torque tool performance to be monitored and tools kept in peak condition.
Basic version has no settable options. Ideal for non-expert users.
Supplied with Auto Ranging Power Supply Unit

Specificaties
Kenmerk Waarde
Digital Yes
Drive Size 1/2 in
Measuring Range 10 → 350Nm
Accuracy ±1 %
6 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
968,90
(excl. BTW)
1.172,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 968,90
Related Products
Mechanical torque calibration analyser for the testing of ...
Description:
Mechanical torque calibration analyser for the testing of production torque screwdrivers and small torque wrenches. 3 models covering a range from 7 cN.m to 12 N.mRobust design with angled dial for ease of useSupplied with Manufacturers Calibration CertificateRepeatable accuracy of ...
Introducing the professional Torque Analyser from Facom. The ...
Description:
Introducing the professional Torque Analyser from Facom. The E.2000-350 Torque Tester is the highest quality tool designed to measure and test of 1/2" torque wrenches before use. Heavy-duty, high-quality body construction, four mounting points, clear, easy-to-read LCD display and 3 ...
Gedore electronic torque tester for setting and verifying ...
Description:
Gedore electronic torque tester for setting and verifying clockwise torque wrenches and torque screwdrivers. Simple to use electronic torque tester with integrated torque transducer Fixed hexagon female driveSwitchable scale from Nm to lbf.ftHigh measurement accuracy: +/- 1% toleranceBreak Point Measurement ...
From RS PRO, this torque wrench is compatible ...
Description:
From RS PRO, this torque wrench is compatible with 1/4 inch driver bits, and is designed to prevent over-tightening when fastening nuts and bolts. The tool applies a pre-set level of torque before 'breaking', preventing you from potentially applying too ...