MTCH105-I/ST, Capacitive Touch Screen Controller Simple I/O, 14-Pin TSSOP

  • RS-stocknr. 905-3167
  • Fabrikantnummer MTCH105-I/ST
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MTCH102/105/108 Capacitive Proximity Touch Controllers

The MTCH102, MTCH105 and MTCH108 devices from Microchip are Capacitive Touch/Proximity Controller ICs that convert touch or proximity detection into a simple digital output. The sensitivity level of the controller is configurable and a low-power mode included, allowing for easy optimisation.

Features

High Signal to Noise Ratio (SNR)
Adjustable Sensitivity with Compensation for Different Sensor Sizes
Multi-Stage Active Noise Suppression Filters
Automatic Environmental Compensation
Supports a Wide Range of Sensor Shapes and Sizes
Simple I/O Interface
Smart Scan Scheduling
Threshold Hysteresis
Flexible Low-Power Mode
Brown-Out Protection
Operating Voltage Range: 2.05V to 3.6V
Operating Temperature: -40°C to +85°C

Human Machine Interface (HMI), Microchip

Specificaties
Kenmerk Waarde
Interface Type Simple I/O
Sensing Technology Capacitive
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 14
Typical Operating Supply Voltage 2.05 → 3.6 V
Dimensions 5.1 x 4.5 x 1.05mm
Length 5.1mm
Width 4.5mm
Height 1.05mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
120 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,773
(excl. BTW)
0,935
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,773
€ 7,73
30 +
€ 0,749
€ 7,49
*prijsindicatie
Related Products
FTDI’s FT801 is an accessible LCD graphic controller ...
Description:
FTDI’s FT801 is an accessible LCD graphic controller targeted for embedded applications to produce high-quality Human Machine Interfaces (HMIs). This Embedded Video Engine (EVE) with widget support can offload the system MPU and deliver a range of graphic features. It’s ...
The Control Integrated Power System (CIPOS) are families ...
Description:
The Control Integrated Power System (CIPOS) are families of highly integrated, compact power modules. They are designed to drive motors in home appliances, fan and pump applications. These energy-efficient Intelligent Power Modules (IPM) deliver increased power density with enhanced system ...
The DICON touch is a two-channel universal process ...
Description:
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization ...
A range of Programmable System-on-chip (PSoC®) products from ...
Description:
A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.