Yoke type track roller ID 30mm OD 62mm W

  • RS-stocknr. 194-7317
  • Fabrikantnummer NATR30-X-PP-A
  • Fabrikant INA
Wetgeving en compliance

Yoke and stud type roller bearing track rollers:Are ready-to-fit needle or cylindrical roller bearings of single or double row designAre mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers)Have particularly thick-walled outer rings with a crowned outside surfaceCan support high radial loadsTolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impactAre available with or without an inner ring (yoke type track rollers)Are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance)Are open or sealed on both sidesAre not mounted in a housing bore, but are supported on a flat mating trackCan be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction

Kenmerk Waarde
Type Yoke
Roller Diameter 62mm
Roller Length 29mm
Static Load Rating 39000N
Dynamic Load Rating 23200N
Ring Slide & Track System Bearing Type Eccentric
Bore Size 30mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 99,06
5 - 9
€ 95,09
10 - 24
€ 93,11
25 +
€ 91,13