EPCOS N87 Ferrite Core, 201nH, 30.6 x 9.8 x 16mm, For Use With Power Transformers, SMPS Transformers

  • RS-stocknr. 125-3666
  • Fabrikantnummer B66358G0500X187
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

EPCOS B66358 ETD 29/16/10 Ferrite Cores

B66358 series ETD 29/16/10 ferrite cores from EPCOS are manufactured to IEC 61185 standards. These ferrite cores are ideal for switch mode power supply transformers as they provide an optimum weight to performance ratio at small volume. Gapped and ungapped varieties are available, and these ferrite cores are offered with construction from either N27, N87 or N97 ferrite material.

EPCOS Ferrite Cores

Specificaties
Kenmerk Waarde
Accessory Type Ferrite Core
For Use With Power Transformers, SMPS Transformers
Dimensions 30.6 x 9.8 x 16mm
AL Rating 201nH
Material N87
Depth 16mm
Length 30.6mm
Width 9.8mm
Standards Met IEC 61185
1070 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
0,764
(excl. BTW)
0,924
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 0,764
€ 7,64
100 - 490
€ 0,48
€ 4,80
500 - 990
€ 0,421
€ 4,21
1000 - 2490
€ 0,363
€ 3,63
2500 +
€ 0,35
€ 3,50
*prijsindicatie
Related Products
D29A09F 10W push-pull audio transformers from OEP are ...
Description:
D29A09F 10W push-pull audio transformers from OEP are constructed with a grain orientated silicon steel core. This core enables reduced distortion and stray magnetic field. These audio output transformers are suitable for use with EL84 valves in push-pull amplifiers and ...
Double aperture cores suitable for broadband transformers up ...
Description:
Double aperture cores suitable for broadband transformers up to high frequencies. N30 material for low frequencies and pulse applicationsK1 material for matching transformers and balancing mixers up to 250MHz in antenna feeders or input circuits of VHF and TV receivers. ...
MYRRA encapsulated electronic transformers are Switched Mode Power ...
Description:
MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topologyThey are an interesting alternative to the traditional supply in the most common applications of power lower than 5WENERGY SAVING due to high efficiency and low standby powerThe ...
EPCOS B65733 PM114/93 Ferrite cores are suitable for ...
Description:
EPCOS B65733 PM114/93 Ferrite cores are suitable for use in transformers handling high powers in the frequency range up to 300 kHz. These PM Cores can be used in numerous tasks in telecommunications and industrial electronics. The pot core shape ...