EPCOS N87 Ferrite Core, 326nH, 38.9 x 12.8 x 20mm, For Use With Power Transformers, SMPS Transformers

  • RS-stocknr. 125-3675
  • Fabrikantnummer B66363G0500X187
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

EPCOS B66363 ETD 39/20/13 Transformer Ferrite Cores

B66363 series ETD 39/20/13 transformer ferrite cores from EPCOS are produced to IEC 61185 standards. B66363 transformer ferrite cores are ideal for switch mode power supplies and at small volume offer optimum weight to performance ratio. Available in gapped or ungapped varieties, you can also choose from N27, N87 or N97 ferrite material.

EPCOS Ferrite Cores

Specificaties
Kenmerk Waarde
Accessory Type Ferrite Core
For Use With Power Transformers, SMPS Transformers
Dimensions 38.9 x 12.8 x 20mm
AL Rating 326nH
Material N87
Depth 20mm
Length 38.9mm
Width 12.8mm
Standards Met IEC 61185
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-03-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 5)
1,984
(excl. BTW)
2,401
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 1,984
€ 9,92
50 - 245
€ 1,222
€ 6,11
250 - 495
€ 0,912
€ 4,56
500 - 1245
€ 0,88
€ 4,40
1250 +
€ 0,836
€ 4,18
*prijsindicatie
Related Products
Range of high efficiency low heat loss 3 ...
Description:
Range of high efficiency low heat loss 3 phase auto transformers. Common input and output windingsEasy installation-mounting holes providedScrew terminal connectionsReverse operation posibleTransformers tested to EN 61558-2-13BLOCKIMPEX vacuum impregnation.
Double aperture cores suitable for broadband transformers up ...
Description:
Double aperture cores suitable for broadband transformers up to high frequencies. N30 material for low frequencies and pulse applicationsK1 material for matching transformers and balancing mixers up to 250MHz in antenna feeders or input circuits of VHF and TV receivers. ...
EPCOS B65713 PM87/70 Ferrite cores are suitable for ...
Description:
EPCOS B65713 PM87/70 Ferrite cores are suitable for use in transformers handling high powers in the frequency range up to 300 kHz. These PM Cores can be used in numerous tasks in telecommunications and industrial electronics. The pot core shape ...
EPCOS B65819 RM7 Ferrite cores are increasingly required ...
Description:
EPCOS B65819 RM7 Ferrite cores are increasingly required for power applications. These ferrite cores are designed for two major applications low loss, highly stable filter inductors and other resonance determining inductors. The other application is low distortion broadband transmission. IEC62317-4. ...