BTA212-600B,127 12A, 600V, TRIAC, Gate Trigger 1.5V 50mA, 3-pin, Through Hole, TO-220AB WeEn Semiconductors Co., Ltd

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TRIAC, WeEn Semiconductors

TRIACs

A range of TRIACs (Triodes for Alternating Current is also known as Bidirectional Thyristors). They are used in AC switching and control applications with current ratings from under 1A to 40A rms. A TRIAC makes a convenient switch for alternating current circuit.

Specificaties
Kenmerk Waarde
Rated Average On-State Current 12A
Mounting Type Through Hole
Package Type TO-220AB
Maximum Gate Trigger Current 50mA
Repetitive Peak Reverse Voltage 600V
Surge Current Rating 105A
Pin Count 3
Maximum Gate Trigger Voltage 1.5V
Repetitive Peak Forward Blocking Voltage 600V
Maximum Holding Current 60mA
Dimensions 10.3 x 4.7 x 9.4mm
Length 10.3mm
Width 4.7mm
Height 9.4mm
Peak On-State Voltage 1.6V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Repetitive Peak Off-State Current 0.5mA
100 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 50)
0,643
(excl. BTW)
0,778
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
50 - 50
€ 0,643
€ 32,15
100 - 200
€ 0,611
€ 30,55
250 - 450
€ 0,578
€ 28,90
500 +
€ 0,546
€ 27,30
*prijsindicatie
Related Products
The DMFC12 is a single phase or phase-to-phase ...
Description:
The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing. Standard Din ...
The DMFC-36 module has been designed to offer ...
Description:
The DMFC-36 module has been designed to offer Phase-Angle or Burst Fire Control in firing a thyristor assembly or complete thyristor controller for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing ...
A range of TRIACs (Triodes for Alternating Current ...
Description:
A range of TRIACs (Triodes for Alternating Current is also known as Bidirectional Thyristors). They are used in AC switching and control applications with current ratings from under 1A to 40A rms. A TRIAC makes a convenient switch for alternating ...
The ACS™ Series are static-switch semiconductors for Alternating ...
Description:
The ACS™ Series are static-switch semiconductors for Alternating Current (AC). They are simple-to-drive, sensitive-gate devices with highly inductive load switch-off capability. They are over-voltage protected.